Search found 322 matches

by Tech_Support
Sun Jun 17, 2018 7:03 am
Forum: Spectrum Analysis
Topic: Feedback for version 0.9a here
Replies: 77
Views: 2234

Re: Feedback for version 0.9a here

maccountrypilot wrote:well uno will not load when the spectrum analyzer tries to run .... it says there is no rsp present


You can only run one at a time as each application will reserve the RSP.

Sincerely

Tech_Support
by Tech_Support
Fri Jun 15, 2018 8:07 pm
Forum: SDRplay related
Topic: new RSPduo rattle
Replies: 2
Views: 105

Re: new RSPduo rattle

Hello Tim,
This will just be the screws in the green connector. Either tighten them up or un-plug the connector and the rattle will go away.

Sincerely

Tech_Support
by Tech_Support
Thu Jun 14, 2018 1:12 pm
Forum: Spectrum Analysis
Topic: Feedback for version 0.9a here
Replies: 77
Views: 2234

Re: Feedback for version 0.9a here

I suspect what you are seeing here is ADC overload. Moving the RF gain from state 0 to state 8 reduces the RF gain. In my tests, I can see a warning for an overloaded ADC.

Steve can perhaps comment better on this.

Sincerely

Tech_Support
by Tech_Support
Wed Jun 13, 2018 5:54 pm
Forum: SDRplay related
Topic: re. App note on Gain and AGC
Replies: 1
Views: 161

Re: re. App note on Gain and AGC

Hello Phil, There is no simple answer to your first question as it really depends upon whether the signals sit within the bandwidth of the pre-selection filters or not. In addition, signals that are outside of the IF bandwidth are no visible anyway, so thwere is no way of knowing their signal streng...
by Tech_Support
Mon Jun 11, 2018 7:42 pm
Forum: SDRuno
Topic: SDR UNO + RSPduo + Decimation window
Replies: 4
Views: 210

Re: SDR UNO + RSPduo + Decimation window

Hello glovisol,
Thank you for the feedback. If you are able to find a repeatable sequence that causes the loss of the decimation menu, please let us know at feedback@sdrplay.com

Sincerely

Tech_Support
by Tech_Support
Mon Jun 11, 2018 6:29 pm
Forum: SDRplay related
Topic: RSPduo vs Flex6300
Replies: 0
Views: 133

RSPduo vs Flex6300

This video, released today by AE5X shows how well the RSPduo performs up against the Flex6300: https://www.youtube.com/watch?v=8ZDilFCVksQ You can also read his blog here, where he interprets the results: http://ae5x.blogspot.com/2018/06/video-flex-6300-vs-rspduo.html John writes “I’m amazed at the ...
by Tech_Support
Mon Jun 11, 2018 10:30 am
Forum: SDRuno
Topic: SDR UNO + RSPduo + Decimation window
Replies: 4
Views: 210

Re: SDR UNO + RSPduo + Decimation window

Hello Glovisol
Decimation is not available if you have selected any of the band framing buttons.

Sincerely

SDRplay Tech_Support
by Tech_Support
Mon Jun 04, 2018 5:44 pm
Forum: SDRuno
Topic: SDRuno crash - Regular issue
Replies: 2
Views: 180

Re: SDRuno crash - Regular issue

Dear Patrick73, This appears to be a support request. If this is the case, please open a support ticket at http://www.sdrplay.com/support as this forum is not effective for customer support as the structure of the forum means it is easy to miss posts and we only monitor posts to ensure that they mee...
by Tech_Support
Sun Jun 03, 2018 4:01 pm
Forum: SDRuno
Topic: Frequency drifting when using port A
Replies: 3
Views: 244

Re: Frequency drifting when using port A

Hello Dougelec, If the red line itself is moving, then SDRuno is actually changing the frequency as opposed to the H/W actually drifting. Can you confirm that the main frequency display is changing? If so, this is not drift in the hardware, but is in fact a setting in SDRuno. If you can't get to the...
by Tech_Support
Sun Jun 03, 2018 3:50 pm
Forum: SDRplay related
Topic: Audio quality in AM mode on RSP1a
Replies: 1
Views: 137

Re: Audio quality in AM mode on RSP1a

There is nothing in the hardware that can make a generic difference to the audio quality of an AM signal, so the difference is almost certainly down to a setting in SDRuno. Make sure that your VFO is offset from the LO or use Low IF mode. If this is not the issue, then I suggest you open up a suppor...

Go to advanced search