Search found 123 matches

by mikexeno
Wed Jun 05, 2019 7:34 pm
Forum: New Users' experiences
Topic: vac for duo
Replies: 3
Views: 1293

Re: vac for duo

I assume you want to monitor two separate areas of the spectrum using WSJT-X
You need to create 2 cables.
Each instance of Uno (x2 for dual tuner mode) should be assigned a cable (RX CONTROL/SETT button/OUT tab)
by mikexeno
Sun May 12, 2019 12:32 am
Forum: General
Topic: ZADIG driver installation
Replies: 4
Views: 1407

Re: ZADIG driver installation

I strongly advise that you unplug the RSP while installing the ZADIG driver for the RTL. If you bind the ZADIG driver to the RSP by mistake, it's a headache and a half to undo.
by mikexeno
Wed May 08, 2019 2:05 pm
Forum: SDRplay related
Topic: RSP1A HF Signals
Replies: 5
Views: 1212

Re: RSP1A HF Signals

Console by default runs a smoothing algorithm on the spectrum. I suggest checking within the options and changing your setting to mirror these
https://imgur.com/M2NSxrZ
by mikexeno
Tue May 07, 2019 6:19 pm
Forum: General
Topic: FLDIGI ? Digital Modes ?
Replies: 5
Views: 1381

Re: FLDIGI ? Digital Modes ?

That part not I am not sure about. I always used MultiPSK and or FLdigi via Virtual Audio Cable and not direct control. Hopefully, others will chime in and lend advice.
by mikexeno
Tue May 07, 2019 4:44 pm
Forum: SDRplay related
Topic: RSP1A HF Signals
Replies: 5
Views: 1212

Re: RSP1A HF Signals

I would bypass the MFJ switch temporarily and run the main antenna into the RSP. Check that your gain settings are correct within Console. Sometimes console hiccups when making drastic gain changes. If all looks good in Console put the switch back inline. Note that the switch can create up to a 3dB ...
by mikexeno
Tue May 07, 2019 4:31 pm
Forum: General
Topic: FLDIGI ? Digital Modes ?
Replies: 5
Views: 1381

Re: FLDIGI ? Digital Modes ?

For FLdigi to talk with SDRuno directly you will need to download and install a 3rd party com port splitter. https://youtu.be/dZg7puQ9Ajk Next step is setting FLdigi rig setting as a Kenwood TS480, This allows FLdigi to control SDRuno. Personally I prefer MultiPSK because it provides more decoding m...
by mikexeno
Sat Apr 13, 2019 1:51 am
Forum: SDRuno
Topic: Wish List Item: Ant Input Changing Automatically
Replies: 2
Views: 493

Re: Wish List Item: Ant Input Changing Automatically

You might have it backwards. The HI-Z is usable from 30 MHz and below. When you go above 30 MHz it will switch automatically.
What your requesting is when you tune above 30MHz and go back down below 30MHz is to have SDRuno switch back to Hi-Z
by mikexeno
Sat Mar 16, 2019 9:39 pm
Forum: New Users' experiences
Topic: Cheap but usable wire?
Replies: 4
Views: 1496

Re: Cheap but usable wire?

I assume by wire antenna you want to listen to HF.

This is what I use.
https://www.ebay.com/itm/1000-Feet-20-A ... 1438.l2649
by mikexeno
Sat Mar 16, 2019 3:50 pm
Forum: SDRuno
Topic: Importing eibi Into Memory Lists ?
Replies: 2
Views: 740

Re: Importing eibi Into Memory Lists ?

Did this work?
by mikexeno
Sat Mar 16, 2019 3:50 pm
Forum: SDRuno
Topic: Two "Housekeeping" Questions
Replies: 1
Views: 546

Re: Two "Housekeeping" Questions

a. is there a global command somewhere to close out all screens, AND Exit the program at the same time ? Click the top right X within the MAIN panel b. Let's say I have one or two screens I haven't been using, and have closed them out. How do I "re-activate" and show them again ? Clicking ...

Go to advanced search