Search found 36 matches

by g4enz
Tue Feb 26, 2019 10:28 am
Forum: SDRuno
Topic: What is the Digital button for in SDRuno?
Replies: 7
Views: 1527

Re: What is the Digital button for in SDRuno?

You will only hear something from the DMR repeaters when there are stations active on a Talk Group that the repeater is set to relay. This means you might have to sit for a long time before someone pops up. Leave DSD+ monitoring even whilst you are not near the radio, it will be apparent on the cons...
by g4enz
Mon Feb 25, 2019 8:27 am
Forum: SDRuno
Topic: What is the Digital button for in SDRuno?
Replies: 7
Views: 1527

Re: What is the Digital button for in SDRuno?

Not too sure where you are in the UK but you ought to be in range of an Amateur DMR repeater.

https://www.ukrepeater.net/repeaterlist ... ter4=dmr70

For DRM use this reference...

http://www.hfcc.org/drm/

The transmission from RFI on 3965 is very strong here in Gloucester in the evenings.
by g4enz
Wed Feb 20, 2019 7:31 pm
Forum: SDRuno
Topic: What is the Digital button for in SDRuno?
Replies: 7
Views: 1527

Re: What is the Digital button for in SDRuno?

There are no "hidden" digital decoders. I was actually listening to a local DMR repeater using my RSPduo as I read your message. I have NFM selected and am piping the audio to DSD+ through a Virtual Audio Cable. You would use the "Digital" mode when receiving DRM stations on HF. ...
by g4enz
Mon Nov 05, 2018 9:49 pm
Forum: Spectrum Analysis
Topic: Spectrum Analyzer on RPDuo?
Replies: 2
Views: 3411

Re: Spectrum Analyzer on RPDuo?

Alessandro,

It works for me on my RSPDuo.

I did need to install SDRuno 1.24 first to get the correct drivers for the Duo. The drivers that come with Analyzer 0.9a do not include support for the RSPduo.

Martin
by g4enz
Sun Nov 04, 2018 9:01 pm
Forum: SDRuno
Topic: CW AFC and ZAP do not work
Replies: 4
Views: 1854

Re: CW AFC and ZAP do not work

You wouldn't buy a Duo just because the CW AFC is a bit awkward? :shock:
by g4enz
Sun Nov 04, 2018 10:48 am
Forum: SDRuno
Topic: CW AFC and ZAP do not work
Replies: 4
Views: 1854

Re: CW AFC and ZAP do not work

Mike, They do work, sort of. You'll get problems with them depending upon what you have done with SP2. If you leave SP2 fully zoomed out, then they will work. You can zoom SP2 in a little but DON'T slide the display to centre up the CW passband. Once you do this it all goes wrong. Zoom back out full...
by g4enz
Sat Nov 03, 2018 9:58 am
Forum: SDRuno
Topic: AUTO CENTERING OF VFO
Replies: 5
Views: 2545

Re: AUTO CENTERING OF VFO

Hi Paul, Well, if you're at Max Zoom, you can hardly zoom in any further so, indeed it cannot work. What I find is that, at any zoom level, if I have tuned such that the signal is not centred, then zooming in will always result in the current VFO frequency being in the centre. Zooming all the way ou...
by g4enz
Fri Nov 02, 2018 3:40 pm
Forum: SDRuno
Topic: AUTO CENTERING OF VFO
Replies: 5
Views: 2545

Re: AUTO CENTERING OF VFO

Paul,

I have only ever seen the behaviour you desire. If I zoom in on SP1, it centres the current tuned frequency. I haven't ever seen any setting to inhibit or set this behaviour, it's just there.

Martin
by g4enz
Sat Oct 06, 2018 9:50 am
Forum: SDRuno
Topic: RSP2 Panadapter Band Change Issue
Replies: 2
Views: 1216

Re: RSP2 Panadapter Band Change Issue

Dave, Just a thought... When you select a band in SDRuno, it sets an appropriate bandwidth and applies LO LOCK . If you then try to go to a different band on your transceiver, the frequency sent to SDRuno will be outside uno's tunable range. Try releasing the LO Lock and see if SDRuno will follow th...
by g4enz
Sun Sep 02, 2018 5:47 am
Forum: General
Topic: HF weak signal reception in presence of noise
Replies: 10
Views: 3638

Re: HF weak signal reception in presence of noise

If you find background noise fatiguing, you might want to leave the AGC on but adjust the threshold. This way the AGC still protects you from LOUD signals.

Uno AGC.jpg
Uno AGC.jpg (59.42 KiB) Viewed 2946 times

Go to advanced search