Search found 22 matches

by EastPier
Wed Aug 14, 2019 3:44 pm
Forum: General
Topic: Transceivers with output for SDR? Help!
Replies: 2
Views: 34702

Re: Transceivers with output for SDR? Help!

mikeladd wrote:
Thu Aug 01, 2019 1:29 pm
The FTDX-3000 has an RX OUT port
https://youtu.be/cVn5k8E_hMM
Thanks a mil. 73
by EastPier
Wed Jul 31, 2019 9:12 pm
Forum: General
Topic: Transceivers with output for SDR? Help!
Replies: 2
Views: 34702

Transceivers with output for SDR? Help!

I'm in the market for a transceiver - one with an output for an SDR. My research points to the Kenwood 590sg as having a straight forward 1mW output covering 1.8 to 50 MHz to drive my RSP2. Are other similarly configured rigs (i.e HF+6m) that I should consider? There are so many rigs out there I jus...
by EastPier
Mon Jun 11, 2018 1:48 pm
Forum: SDRplay related
Topic: Sharing antenna with RSP2 & transciever via MFJ 1708SDR - problem
Replies: 0
Views: 6570

Sharing antenna with RSP2 & transciever via MFJ 1708SDR - problem

Hi All I have bought the RF sensing switch from MFJ. However, when keying up (transmitting) I am seeing RF all over the band scope (the SDR is shunted to ground during transmit). It's the effect same with a dummy load. I have posted a video of the issue below. Any ideas/advice on solutions would be ...
by EastPier
Sat Jun 09, 2018 2:06 pm
Forum: SDRuno
Topic: Sdruno, IC 7300, MFJ1708 help
Replies: 5
Views: 20667

Re: Sdruno, IC 7300, MFJ1708 help

Are you guys using the "ORIG" section in the "RX Settings" of the RX Control, or the "cat" menu in that same box? People get confused with those two. Use the "ORIG" tab..(for Omnirig) NOT the "cat" tab. The other thing is to make sure "RSYNC1" is highlighted (mine turns orange). It's also in the "R...
by EastPier
Fri Jun 08, 2018 2:38 pm
Forum: SDRuno
Topic: Sdruno, IC 7300, MFJ1708 help
Replies: 5
Views: 20667

Re: Sdruno, IC 7300, MFJ1708 help

Me too! Have FT 840 (got the FTDI CAT cable), MFJ 1708, Omnirig & SDRUNO. Just got everything today and I'm really struggling to get things off the ground. It may something to do with pairing com ports. Have you had any luck?

Adrian
by EastPier
Mon Jan 15, 2018 1:30 pm
Forum: SDR Antennas
Topic: Balanced Line Sharing of RSP2 with Rig. Yaesu FT 840
Replies: 5
Views: 22499

Re: Balanced Line Sharing of RSP2 with Rig. Yaesu FT 840

Hi Adrian As a newbie to SDR I recommend you use it in listening mode for some time before transmitting into the antenna!. I have been licensed for 55 years and will probably spend the next 6 months using my newly purchased RSP2 to check out RFI sources in the shack. The first RFI problem has alrea...
by EastPier
Sat Nov 04, 2017 5:44 pm
Forum: SDR Antennas
Topic: Balanced Line Sharing of RSP2 with Rig. Yaesu FT 840
Replies: 5
Views: 22499

Re: Balanced Line Sharing of RSP2 with Rig. Yaesu FT 840

Not sure how the twinlead is going to connect but look into one of these devices. https://www.dxengineering.com/parts/dxe-rtr-2 http://www.mfjenterprises.com/Product.php?productid=MFJ-1708 http://www.ebay.com/itm/Antenna-sharing-device-QSK-TX-RX-switch-For-SDR-and-Radio/122558706221?ssPageName=STRK...
by EastPier
Thu Nov 02, 2017 10:16 pm
Forum: SDRuno
Topic: 1.2 Doesn't work properly - can I download original again please?
Replies: 5
Views: 16827

Re: 1.2 Doesn't work properly - can I download original again please?

Hello Adrian, I suggest that you open up a support ticket. This will almost certainly be a settings issue as 1.2 has a different registry map from 1.13. What I can assure you of is that nothing whatsoever has changed within the core signal processing engine, so if you are having a problem leading t...
by EastPier
Thu Nov 02, 2017 9:37 pm
Forum: SDRuno
Topic: 1.2 Doesn't work properly - can I download original again please?
Replies: 5
Views: 16827

Re: 1.2 Doesn't work properly - can I download original again please?

Adrian, Looking at your video, I notice that you have the fatal combination of listening to AM with the receive frequency and the local oscillator frequency being the same. The software that removes the "centre spike" on a Zero IF signal will also remove the AM signal's carrier. Try offsetting the ...
by EastPier
Thu Nov 02, 2017 7:10 pm
Forum: SDRuno
Topic: 1.2 Doesn't work properly - can I download original again please?
Replies: 5
Views: 16827

1.2 Doesn't work properly - can I download original again please?

Hi SDRplay team I appreciate the time and effort that has gone into SDRUno 1.2. However, it doesn't work properly - I don't know what the issue is and haven't a clue around how to fix it. All I know is that receive quality is significantly degraded across all bands. As an example I have attached a c...