Search found 47 matches

by pgoelz
Fri Mar 29, 2019 12:59 pm
Forum: SDRuno
Topic: re: having to reset to defaults on sdruno start up
Replies: 17
Views: 48220

Re: re: having to reset to defaults on sdruno start up

Not sure why I need to do this every time I start sdruno 1.3. If I don't, sound is garbled and audio bandwidth center is way off. I don't change anything really. Maybe I should mention also have new Rsp1a. Was using older version sdruno with rtl sdr previously and did not have this issue. Anyone el...
by pgoelz
Fri Mar 29, 2019 12:34 pm
Forum: SDRuno
Topic: re: having to reset to defaults on sdruno start up
Replies: 17
Views: 48220

Re: re: having to reset to defaults on sdruno start up

Plus - a bit more info on the 'max RF gain on startup' thing. It only does this this if the Hi-z input is selected. It also goes full gain when moving from Ant A to Hi-z. From what I understand, the GAIN or ATTENUATION setting is a single number that is applied to all inputs. However, the HiZ and t...
by pgoelz
Mon Mar 25, 2019 2:15 am
Forum: SDRuno
Topic: re: having to reset to defaults on sdruno start up
Replies: 17
Views: 48220

Re: re: having to reset to defaults on sdruno start up

Re 3 (step sizes), the latest one was a 5kHz step being selected when I was using SAM. I hadn't selected that size, it just appeared after I'd come from a different mode. I corrected it to 1kHz (OK for MW listening) and tried to provoke it, but it worked perfectly. So random it's almost impossible ...
by pgoelz
Sun Jun 03, 2018 10:19 am
Forum: SDRuno
Topic: Corruption of SAM SB audio
Replies: 5
Views: 13286

Re: Corruption of SAM SB audio

ADC overload is a function of the incoming signal strength, not the CPU load. The ADC sees all signals within the current bandwidth and the strongest signal must not exceed the maximum that the ADC can handle. If the ADC indicates overload, just reduce the incoming signal strength with the gain slid...
by pgoelz
Fri Jun 01, 2018 2:46 pm
Forum: SDRuno
Topic: Corruption of SAM SB audio
Replies: 5
Views: 13286

Re: Corruption of SAM SB audio

Histoically - thanks also for previous advice regarding getting myself an HF preselector - have it going, but only on Port A with the Wellbrook as although the Hi-Z Port works well with a longwire, I'm still unhappy with the loop's performance on it (and with the preselector - really problematic) -...
by pgoelz
Mon Jan 29, 2018 11:02 pm
Forum: SDRuno
Topic: SDRUno vs. Others
Replies: 8
Views: 24137

Re: SDRUno vs. Others

Well I will try to figure out why the audio is cutting out with Uno. I know I have more than enough computer for it. Try a different USB port for starters. Heck, try all of them ;) Depending on your motherboard, some may be faster than others. Also, some USB ports are grouped together on an interna...
by pgoelz
Sun Jan 28, 2018 1:13 pm
Forum: SDRuno
Topic: SDRUno vs. Others
Replies: 8
Views: 24137

Re: SDRUno vs. Others

Your apparent USB bandwidth issue aside, I find most modern SDR software is fairly comparable in its ability to receive, filter and demodulate. The difference is in configuration, layout and usability. In that respect, I find SDRUno to be well ahead of all the other SDR software I have tried. For me...
by pgoelz
Fri Jan 26, 2018 4:05 pm
Forum: SDRuno
Topic: Ideas for future Updates
Replies: 33
Views: 91981

Re: Ideas for future Updates

Here's another suggestion.... add the ability for the meter to display input power level (dBm) and even SNR. I know input power is displayed as a number. But seeing it on a meter scale is easier to quickly assimilate.

Paul
by pgoelz
Thu Jan 18, 2018 2:18 am
Forum: SDRplay related
Topic: RSP2 with hardware frequency tuning wheel
Replies: 12
Views: 41678

Re: Workspaces and Updating to Ver. 1.22

Ver.1.22 works now but I am unable to change i.e. <Workspace 1> into another name. After right click on the name I can type the name I would like in the field but saving it with CTRL+W just bells once in the speaker and shows the workspace list. When leaving the appearing list it shows that "the ac...
by pgoelz
Wed Jan 17, 2018 8:16 pm
Forum: SDRuno
Topic: SDRuno 1.22 Released
Replies: 22
Views: 69137

Re: SDRuno 1.22 Released

Saving workspaces makes perfect sense once you understand how it works, but it can be a bit confusing to start..... CTRL-W merely opens the workspace save window, it does not actually save the workspace. To save the workspace, press CTRL-W, then click the desired workspace entry in the list where yo...