Search found 18 matches

by n3hkn
Wed Sep 19, 2018 2:45 pm
Forum: SDRuno
Topic: Rig Control Delay - IC7300
Replies: 1
Views: 8492

Rig Control Delay - IC7300

I am using SDRuno/RSP1A as a panadaptor for an Icom 7300. Works well except - there is a few second delay between clicking/selecting a signal on the SDRuno display and a reaction by the 7300. I have tried several speeds between the PC and the 7300 but basically the problem remains. If I quickly use ...
by n3hkn
Wed Aug 15, 2018 5:10 pm
Forum: General
Topic: SDRuno S-Meter = S5 With No Antenna
Replies: 13
Views: 35509

Re: SDRuno S-Meter = S5 With No Antenna

Ok, I understand.. Back to having fun.......
THANKS
by n3hkn
Wed Aug 15, 2018 12:51 pm
Forum: General
Topic: SDRuno S-Meter = S5 With No Antenna
Replies: 13
Views: 35509

Re: SDRuno S-Meter = S5 With No Antenna

See attachment for picture: Version -> 1.22.0.0 in Properties. I had downloaded version 1.23.1 I thought I had run the installer but looks like 1.22.0.0 is still operational. So, does that make a difference in what I am seeing? As far as the S-Meter and dbm meter they seem to be close in the values ...
by n3hkn
Mon Aug 13, 2018 3:22 pm
Forum: General
Topic: SDRuno S-Meter = S5 With No Antenna
Replies: 13
Views: 35509

SDRuno S-Meter = S5 With No Antenna

The S-Meter shows S-5 with no antenna. Also, -94dbm, SNR11.6, RBW 40.8

I understand that this is the aggregate of the total sample times. But S-5 seems odd with the antenna RSP1A 8 inch antenna lead terminated into a dummy load.
Dick N3HKN
by n3hkn
Mon Aug 13, 2018 12:24 pm
Forum: SDRuno
Topic: Problem loading all memory data banks after adding an entry
Replies: 5
Views: 14509

Re: Problem loading all memory data banks after adding an entry

My Memory Panel does not work at all. It appears but is now empty and will not accept new entries. I am not clear on the remedy. I have no problem deleting all data files relating to the panel or reloading the software or both. But since everything is otherwise working are these the best steps to ta...
by n3hkn
Fri Jul 27, 2018 12:32 pm
Forum: New Users' experiences
Topic: Can RSP1A Replace an Icom 7300?
Replies: 1
Views: 12797

Can RSP1A Replace an Icom 7300?

I have been agonizing about getting an Icom 7300. I have used lots of SDR stuff for a few years. But ending up with an FT-450D Yaesu. It is ok but certainly not an SDR. I bought the RSP1A just to see how the latest SDR stuff was working before I lost $1000 in the 7300 rush. I have my FT-450D compute...
by n3hkn
Thu Jul 26, 2018 2:48 pm
Forum: General
Topic: My Replacement For A New ICOM 7300
Replies: 0
Views: 5975

My Replacement For A New ICOM 7300

I have been agonizing about getting an Icom 7300. I have used lots of SDR stuff for a few years. But ending up with an FT-450D Yaesu. It is ok but certainly not an SDR. I bought the RSP1A just to see how the latest SDR stuff was working before I lost $1000 in the 7300 rush. I have my FT-450D compute...
by n3hkn
Sun Jul 15, 2018 4:42 pm
Forum: SDRuno
Topic: SDRUno S-Meter Reading?
Replies: 2
Views: 9699

SDRUno S-Meter Reading?

First I assume that the data for the meter is picked up close to where the audio is handed off to the PC. I really am not an engineer but an amateur customer. When I vary the audio bandwidth the reading on the S-Meter changes. Very strange. Some Hams may believe that it is true signal strength when ...
by n3hkn
Wed Jul 04, 2018 1:27 pm
Forum: SDRuno
Topic: Custom Framing
Replies: 1
Views: 6467

Custom Framing

The Band Buttons are convenient. Now, being greedy, I would like to frame specific areas of each band. Expansion of the specific band areas ( phone, CW, Data, DX, etc.) improves visibility of signals and ease of point & click selection. Is there a process to make "custom :?: frames"?
by n3hkn
Tue Jun 26, 2018 12:55 pm
Forum: SDRuno
Topic: Band Change Not Following The Transceiver
Replies: 1
Views: 6453

Band Change Not Following The Transceiver

Yaesu FT-450D
When I change bands using the transceiver SDRuno does not change. All other joint operations seem to work ok. :?: