Search found 798 matches

by sdrplay
Thu Aug 16, 2018 11:39 am
Forum: General
Topic: Mac troubles
Replies: 5
Views: 153

Re: Mac troubles

Firstly, the result from SoapySDRUtil is absolutely correct, so SoapySDR can see the RSP just fine. It looks like CubicSDR and gqrx seem to report the same error condition. Focusing on CubicSDR, did you build that from source or install it from a installer? I found something similar here: https://gi...
by sdrplay
Wed Aug 15, 2018 11:05 am
Forum: General
Topic: Mac troubles
Replies: 5
Views: 153

Re: Mac troubles

What is the result of the following commands run from a terminal window... SoapySDRUtil --info SoapySDRUtil --find=sdrplay SoapySDRUtil --probe=sdrplay If you don't get any output, run it twice. Also, try this also in a terminal window to show what USB devices are connected... ioreg -p IOUSB If Cubi...
by sdrplay
Mon Aug 06, 2018 2:51 pm
Forum: SDRuno
Topic: UNO v 1.23.1 strange behaviour
Replies: 2
Views: 300

Re: UNO v 1.23.1 strange behaviour

RSP1 gain control is broken in SDRuno 1.23 - I wouldn't recommend using 1.23 with RSP1. RSP1A/RSP2/RSP2pro/RSPduo are ok as they use a different gain control.

Best regards,

SDRplay Support
by sdrplay
Sat Aug 04, 2018 6:29 am
Forum: General
Topic: Research for newbie
Replies: 3
Views: 315

Re: Research for newbie

This is a community forum, we try to comment on posts when we can, but for support from us specifically, the best thing is to always raise a ticket: https://www.sdrplay.com/support - I'll try to comment on your questions... Q1 - In our own software, SDRuno, scanning is coming in the next release. We...
by sdrplay
Fri Aug 03, 2018 7:58 pm
Forum: SDRuno
Topic: SDRUno next version?
Replies: 3
Views: 345

Re: SDRUno next version?

Holiday?! What is that? Between sorting out the APIs, updating SoapySDRPlay for the RSPduo, working on ExtIO plugin for the RSPduo (which is in testing) and some other stuff, no time for holiday. The next version of SDRuno is important to us and I've made a start. Don't have a release date for you I...
by sdrplay
Thu Aug 02, 2018 8:10 am
Forum: General
Topic: Is the Playground down, gone or moved?
Replies: 2
Views: 243

Re: Is the Playground down, gone or moved?

The playground system was abused so had to be taken down. Hopefully we'll be able to replace it in the near future.

Best regards,

SDRplay Support
by sdrplay
Tue Jul 31, 2018 10:33 pm
Forum: SDRuno
Topic: SDRuno CAT menu
Replies: 1
Views: 212

Re: SDRuno CAT menu

Omni-Rig for communication between SDRuno and your transceiver.

CAT is to make SDRuno behave like a transceiver (Kenwood TS-480)

Best regards,

SDRplay Support
by sdrplay
Tue Jul 31, 2018 10:08 am
Forum: SDRuno
Topic: sdrplay rsp1a recording
Replies: 2
Views: 164

Re: sdrplay rsp1a recording

SDRuno records the entire bandwidth of the IQ spectrum being received centered around the LO frequency. When you are playing that back in SDRuno, you can then select the VFO you want to listen to. If you have done that, check that the audio output device in the VRX Control Panel is correct. Best reg...
by sdrplay
Thu Jul 26, 2018 7:26 am
Forum: SDRplay related
Topic: Basic Cat Control with RSP2 and SDRUno
Replies: 2
Views: 312

Re: Basic Cat Control with RSP2 and SDRUno

Section 14 of the SDRuno User Manual explains CAT control and how SDRuno emulates a Kenwood TS-480 - you will need serial port splitter software (which you can find on the internet - I use VSPE) and then another application can control SDRuno via CAT and treat SDRuno as a radio receiver. Best regard...
by sdrplay
Sat Jul 21, 2018 12:12 pm
Forum: General
Topic: Default SSH username for the SDR Play Pi image
Replies: 9
Views: 517

Re: Default SSH username for the SDR Play Pi image

Once you have one setup, then you could clone the SD card to other machines - that's how the first version of the card was setup.

Best regards,

SDRplay Support

Go to advanced search