Search found 14 matches

by I2SVA
Wed Jan 16, 2019 10:18 am
Forum: SDRplay related
Topic: SkimmerServer and RSPDuo - crash when changing config
Replies: 1
Views: 618

Re: SkimmerServer and RSPDuo - crash when changing config

Issue solved with the latest release of
SDRplayintf.dll V1.5

Thanks to Steve, N2IC for the new development!
73
Alessandro i2sva
by I2SVA
Thu Dec 20, 2018 3:23 pm
Forum: SDRplay related
Topic: SkimmerServer and RSPDuo - crash when changing config
Replies: 1
Views: 618

SkimmerServer and RSPDuo - crash when changing config

Hi all - support - Steve, I have an issue with CW Skimmer Server: * When doing and confirming (Apply or OK) any change in Skimmer, Telnet and/or Operator Tab the SkimSrvr stop running and close (even when clicking APPLY without having done any change) My setup: SDRplay DUO CW Skimmer Server: * Skimm...
by I2SVA
Mon Nov 05, 2018 7:12 pm
Forum: SDRuno
Topic: Filter by VRX Frequency - possible enhan
Replies: 1
Views: 1066

Filter by VRX Frequency - possible enhan

Hi all, after having read a thread I tested "Filter by VRX Frequency". It is an useful function but I suggest the following small changes: - The filter is accurate to 1Hz; if you tune at + or - 1 Hz or more from the stored frequency it does not show anything; it should be much better to ha...
by I2SVA
Mon Nov 05, 2018 5:43 pm
Forum: Spectrum Analysis
Topic: Spectrum Analyzer on RPDuo?
Replies: 2
Views: 2558

Spectrum Analyzer on RPDuo?

Hi all,
any plan to have the Spectrum Analyzer SW available on RSPduo?
Thansk

Alessandro, I2SVA
by I2SVA
Mon Nov 05, 2018 5:32 pm
Forum: SDRplay related
Topic: Spurious signals every 12 MHz
Replies: 5
Views: 2116

Re: Spurious signals every 12 MHz

Hi Andy and tech_support,

thanks for the explanation and for the clarification; I agree that this is not a very big issue and overall the RSPDuo is a very nice product, with excellent price/performance ratio.
Thanks again for your courtesy and best 73

Alessandro i2sva
by I2SVA
Wed Oct 31, 2018 12:22 pm
Forum: SDRplay related
Topic: Spurious signals every 12 MHz
Replies: 5
Views: 2116

Re: Spurious signals every 12 MHz

Hi Andy, I thought about 24MHz as a ref frequency; what surprise me is that, in my device, ALL the harmonics of 24MHz are equally strong (very strong S9 / S9+) from 24MHz up to 1992 MHz. In addition I have also the harmonics of 12MHz at a variable level from NIL to S9/S9+. IMHO this is a bit more th...
by I2SVA
Wed Oct 31, 2018 10:17 am
Forum: SDRplay related
Topic: Spurious signals every 12 MHz
Replies: 5
Views: 2116

Spurious signals every 12 MHz

Hi support, all, I noticed spurious signals on my RSPDuo, even when the antenna is disconnected and the antenna connector is closed on 50 Ohm termination. I used a PC battery powered and shut down all the other rigs in my home in order to avoid external disturbances. The spurious signals seems to be...
by I2SVA
Mon Oct 29, 2018 4:06 pm
Forum: SDRplay related
Topic: RSPduo and Dump1090 - Filters?
Replies: 6
Views: 2470

Re: RSPduo and Dump1090 - Filters?

Hi Andy, sorry it take so long, finally I had the time to test the new software and "wow!" finally it started very well (just double-clicking start8i) and immediately started listing tenths of aircrafters. With a second click I started the Virtual radar server and the browser map was immed...
by I2SVA
Mon Oct 15, 2018 6:33 pm
Forum: SDRplay related
Topic: RSPduo and Dump1090 - Filters?
Replies: 6
Views: 2470

Re: RSPduo and Dump1090 - Filters?

Thanks, this is good and I look for the link. Please note that when I start SDRuno with Filters enabled it works like the filters are disabled, i.e. I have to disable the filters in SDRuno and then re-enable in order to have the filters working properly. Is this a known bug? Thanks Alessandro i2sva
by I2SVA
Sun Oct 14, 2018 9:00 am
Forum: SDRplay related
Topic: RSPduo and Dump1090 - Filters?
Replies: 6
Views: 2470

RSPduo and Dump1090 - Filters?

Hi readers and Support,
how can I set the mw/fm filter and/or the DAB filter on in Dump1090?
I tried the argument rspduoNotchEn (not sure it is the right one) but it always returns "Unknown or not enough arguments for option "rspduoNotchEn"
Thanks!

Alessandro i2sva

Go to advanced search