Search found 302 matches

by g1hbe
Fri Apr 20, 2018 9:51 am
Forum: SDR Antennas
Topic: Using a Wellbrook ALA1530LN on an RSP2
Replies: 4
Views: 230

Re: Using a Wellbrook ALA1530LN on an RSP2

Hi Paul I use my Wellbrook 1530 withthe Hi-z port, as this port is more suited to LF/MF/HF use. It has lower noise, lower gain and better overload characteristics than the other two ports (at these frequencies). I keep the ports A & B for VHF. The one disadvantage of the Hi-z port is the lack of...
by g1hbe
Mon Apr 16, 2018 7:01 am
Forum: SDRuno
Topic: Calibrating SDRUno
Replies: 2
Views: 177

Re: Calibrating SDRUno

'An eighth of an inch' doesn't mean a lot Max, as it depends on what span you have selected and any zoom you are using. Can you say how many KHz it is? The RSP2 and 1a are usually very close to their claimed frequency (with in a few hundred Hz at VHF) and anything bigger than this may indicate somet...
by g1hbe
Sat Apr 14, 2018 8:03 am
Forum: SDR Antennas
Topic: Looking for a Wellbrook LF1010
Replies: 3
Views: 345

Re: Looking for a Wellbrook LF1010

It's worth remembering that the LA1530 works down to at least 20 KHz. There's a group of 4 or 5 data sigs around 20 KHz that come in well here in NW England. I suspect the response is dropping by this point though, so if you need to hear down to 10 KHz, maybe the LF1010 would be better. I've attache...
by g1hbe
Mon Apr 09, 2018 12:44 pm
Forum: New Users' experiences
Topic: SDR PLay RSP2 Characteristics
Replies: 2
Views: 231

Re: SDR PLay RSP2 Characteristics

I can't answer any of your questions except the reference frequency. It is 24 MHz on all models.
by g1hbe
Sun Apr 08, 2018 9:48 am
Forum: SDRplay related
Topic: New to this and my RSP2 keeps switching antenna inputs
Replies: 3
Views: 252

Re: New to this and my RSP2 keeps switching antenna inputs

Kenny - be prepared to spend some time getting used to it. The RSP's are all fine receivers which will receive just as much as your analogue radios. In many ways they are better, as you can set filter widths and gain levels to suit your tastes with far more flexibility. I was just like you - old-sch...
by g1hbe
Thu Apr 05, 2018 12:57 pm
Forum: SDR Antennas
Topic: First setup VHF 118-160 MHz
Replies: 3
Views: 523

Re: First setup VHF 118-160 MHz

Neil The RSP's use SMA antenna connectors. If your antenna cable is big & heavy, I'd recommend an adaptor lead rather than a rigid block adaptor. This will take the strain off the system. There's a company called Sinequanon that do ready-made leads and their prices are reasonable. I don't know w...
by g1hbe
Sun Apr 01, 2018 10:52 pm
Forum: SDRuno
Topic: Saving screen layout
Replies: 2
Views: 288

Re: Saving screen layout

The method of saving your workspace has changed. It's detailed on page 13 of the manual, available via the OPT menu.
by g1hbe
Sat Mar 31, 2018 11:00 pm
Forum: SDRplay related
Topic: circuits
Replies: 1
Views: 314

Re: circuits

Basically yes. The chipset is the Mirics in all versions but the antenna signal routing is different and the RSP-1a has extra (and better) bandpass filters. Also the RSP1a makes use of a hidden feature which can use an extra 2 bits of ADC resolution, but I wouldn't expect this to make a big differen...
by g1hbe
Thu Mar 29, 2018 8:17 am
Forum: SDR Antennas
Topic: Sangean Portable Antenna for RSP1A?
Replies: 3
Views: 639

Re: Sangean Portable Antenna for RSP1A?

Remember that the Hi-z connector is best when using a short-wire antenna. It also has by far the best response at LF if that is your interest.
by g1hbe
Fri Mar 09, 2018 6:10 pm
Forum: New Users' experiences
Topic: sdrplay1
Replies: 1
Views: 461

Re: sdrplay1

Welcome. The RSP's are all sensitive and well-performing receivers, and most performance issues are due to a bad choice of settings, poor antennas or incorrect operation. A good read of the manual and getting basic operation right before trying all the bells & whistles is recommended. When you s...

Go to advanced search