Search found 341 matches

by Tech_Support
Sat Jun 02, 2018 6:22 pm
Forum: SDRuno
Topic: SDRuno V1.22/V1.23 an observation
Replies: 6
Views: 929

Re: SDRuno V1.22/V1.23 an observation

Hello again Paul, If you are able to replicate the effect you were seeing with the notch filter, can you try stopping and starting the stream to see if that helps? If that doesn't help, can you try quitting SDRuno and re-starting it to see if that clears the problem? I think the problem might actual...
by Tech_Support
Sat Jun 02, 2018 10:15 am
Forum: SDRuno
Topic: SDRuno V1.22/V1.23 an observation
Replies: 6
Views: 929

Re: SDRuno V1.22/V1.23 an observation

Hello Paul, I have checked this, but can find no indication that the notch filter is not working correctly with the RSP2. To confirm, can you go to the AM/MW band and check again? Also check that you gain slider is working correctly. If you are able to reliably find a sequence that results in the AM...
by Tech_Support
Sat Jun 02, 2018 9:34 am
Forum: SDRuno
Topic: SDRuno V1.22/V1.23 an observation
Replies: 6
Views: 929

Re: SDRuno V1.22/V1.23 an observation

Hello Paul,
We will check this. The notch filters are hardware, so if there is a substantial difference, it has to be because the hardware is not being controlled correctly.

Thanks for flagging this.

Sincerely

SDRplay Tech_Support
by Tech_Support
Fri Jun 01, 2018 2:03 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 1883

Re: RSP-1 and SDRUno 1.23 and newer?

At no point have we ever suggested that we will drop support for older products in newer versions of SDRuno. This is simply not the case. Please remember that the RSPduo was launched at a very specific event (Dayton) and as a consequence the software had to be released on a specific date. that place...
by Tech_Support
Thu May 31, 2018 8:17 am
Forum: SDRuno
Topic: Frequency drifting when using port A
Replies: 3
Views: 549

Re: Frequency drifting when using port A

Hello Dougelec, Not only is this not normal, it isn't actually possible for one port to exhibit drift and the other not. Everything uses the same frequency reference inside an RSP and so drift can only come from changes in the frequency reference. It should be stressed that the higher frequency you ...
by Tech_Support
Sat May 26, 2018 4:24 pm
Forum: SDRplay related
Topic: RSP duo Linux support
Replies: 3
Views: 888

Re: RSP duo Linux support

Yes we do. That's the plan. I'm afraid that I cannot give you a schedule yet though.

Sincerely

SDRplay Tech_Support
by Tech_Support
Wed May 23, 2018 2:07 pm
Forum: SDRplay related
Topic: RSP1A and software question
Replies: 6
Views: 1006

Re: RSP1A and software question

Yes, the RSP1A also uses the Mirics chipset. However, the chipset is configured in a slightly different way and the RSP1A has a completely re-designed RF front-end (RF pre-selector, LNA and Gain control).

Sincerely

SDRplay Tech_Support
by Tech_Support
Wed May 23, 2018 9:58 am
Forum: SDRplay related
Topic: RSP1A and software question
Replies: 6
Views: 1006

Re: RSP1A and software question

The recorded spectrum is in I/Q baseband format, but it is of the full spectrum that was displayed when recorded. You will need to replay the files in SDRuno and select the signals that you are interested. You will not be able to replay the signals in something like Windows Media Player. Sincerely S...
by Tech_Support
Tue May 22, 2018 7:20 am
Forum: New Users' experiences
Topic: RSP1a and BIAS-T
Replies: 7
Views: 1545

Re: RSP1a and BIAS-T

Err, there is a bit of confusion here. The Bias-T is not poly-fused. It has an overcurrent reset on it. Drawing too much current will simply shut the bias-T down. To get it back on you need to cycle the control for it, but it will turn back on instantly.

Sincerely

SDRplay Tech_Support
by Tech_Support
Mon May 21, 2018 9:30 pm
Forum: General
Topic: Clear Recommended Computer requirements (for RSP on a Laptop)
Replies: 10
Views: 6516

Re: Clear Recommended Computer requirements (for RSP on a Laptop)

I run the RSPduo using a pretty old Core i3 540 running at 3.07 GHz with 8 Gbytes of RAM. I can run both tuners in SDRuno with a total CPU load of around 30%. A single tuner at 10 MHz bandwidth needs about 35% CPU with SDRuno 1.23. I am also able to run dual tuners in SDRuno, with one tuner decoding...

Go to advanced search