Search found 100 matches

by F1BJB
Sun Nov 20, 2016 5:51 am
Forum: SDRplay related
Topic: Ferrite and interference spikes?
Replies: 10
Views: 5821

Re: Ferrite and interference spikes?

This may be a never-ending quest! Perhaps the best fix will be to move the antenna to the other end of the house from all this electronics, and run quality coax from there. Hi Thanks for your interesting remarks about locally generated interference. One of the antenna I am using is a CA2X4max colli...
by F1BJB
Fri Nov 18, 2016 9:10 pm
Forum: SDRplay related
Topic: SDRPlay as remote receiver over WIFI
Replies: 7
Views: 3837

Re: SDRPlay as remote receiver over WIFI

I tried this: http://www.usb-over-network.org/downloads/ It works but unlimited version is expensive Tried it with an RTL DVB dongle from an orangePI with only 100Mbps network to a windows PC It seems that 100Mbps is too slow for some USB2 devices. For WIFI I think you must use locally a WebSDR soft...
by F1BJB
Fri Nov 18, 2016 8:33 pm
Forum: General
Topic: Volume cuts in and out intermitently every second SOLUTION!
Replies: 4
Views: 1935

Re: Volume cuts in and out intermitently every second SOLUTION!

Of course if you want to record a 1296MHz EME contest you can use an 8Mhz bandwidth You will get big wave files that you cannot split or explore with current audio software You wont be able to play them on many computers. But you wont get any overload helped a lot here by the directivity of your aer...
by F1BJB
Mon Nov 14, 2016 11:38 pm
Forum: General
Topic: Volume cuts in and out intermitently every second SOLUTION!
Replies: 4
Views: 1935

Re: Volume cuts in and out intermitently every second SOLUTION!

Hi Except for displaying a wide spectrum when you want to listen to a particular signal it is a bad idea to use an 8 MHz bandwidth. You increase the risk of overloading the ADC. If you record the whole spectrum (a great advantage of SDR IMHO) you get very big files. And of course you use a lot of pr...
by F1BJB
Wed Nov 02, 2016 1:55 pm
Forum: General
Topic: What is on everyone's SDRplay V2.0 wish list?
Replies: 12
Views: 4792

Re: What is on everyone's SDRplay V2.0 wish list?

There is one thing I don't like on USB devices it is the need for an external USB cable :D Depending on the one you use ,it's length,whether or not its uses ferrites, performances change. Especially when you forget to take the good cable with you :D May be it would be a good idea to use a good tail ...
by F1BJB
Wed Nov 02, 2016 1:36 pm
Forum: General
Topic: Should your RF ground connect all the way to the SMA jack?
Replies: 2
Views: 1777

Re: Should your RF ground connect all the way to the SMA jack?

If the shield of your coaxial cable is not connected to the ground of the receiver there is no advantage to using coaxial cable.
At HF it may seem to work but above 20Mhz it is really bad.
by F1BJB
Wed Oct 19, 2016 10:36 am
Forum: SDR Antennas
Topic: Magnetic Loop Antenna with SDRPlay
Replies: 9
Views: 9292

Re: Magnetic Loop Antenna with SDRPlay

I certainly got a lot more signal with the loop plugged in that without it - but nothing like the amount of signal I get with a 2 m long dipole fed through coax that is mounted outside and is primarily for the OIRT ~70 MHz)band. The checks were carried out on MW and the main broadcast SW bands. It ...
by F1BJB
Mon Oct 17, 2016 10:02 am
Forum: SDR Antennas
Topic: RA0SMS Miniwhip bad performance on SDRPlay
Replies: 28
Views: 6267

Re: RA0SMS Miniwhip bad performance on SDRPlay

The max performance i get out of it is with the LNA off and gainreduction to it's maximum setting any other setting only raises noisfloor and lowers signals into the noise. Hi From that description I would suspect some kind of UHF oscillation of the miniwhip. Try replacing the Q2 emitter follower t...
by F1BJB
Mon Oct 17, 2016 9:46 am
Forum: SDR Antennas
Topic: Is it over kill toshield your RF ground if its far away?
Replies: 1
Views: 1012

Re: Is it over kill toshield your RF ground if its far away?

Hi Where would you connect the shield of your shielded ground ? To avoid ground loops between the AC plug/USB ground and the RF ground on HF receive aerials. I use small toroid transformers made with toroid core salvaged from energy saving lamps . They are located at the base of vertical antennas or...
by F1BJB
Mon Oct 17, 2016 9:09 am
Forum: SDR Antennas
Topic: Where to get SMA Adapters that are 50 Ohm 2GHz? Do they exist?
Replies: 3
Views: 1749

Re: Where to get SMA Adapters that are 50 Ohm 2GHz? Do they exist?

And serious work at those frequencies involve using an external pre-amplifier to correct cable loss that
will also correct any small adapter mismatch and allow the use of cheap 75 Ohms cable for long runs
For cheap adapters look at the WIFI specialists.

Go to advanced search