Search found 103 matches

by Paul
Wed Sep 20, 2017 5:17 pm
Forum: General
Topic: SdrSharp High Z input?
Replies: 1
Views: 410

Re: SdrSharp High Z input?

Hi there I am no longer using SDRSharp for HF using my RSP2 and revision 1360 and am now simply using a RTL SDR for V/UHF scanning, however with that revision at least one could access the RSP radio control panel and in my case being presented with a default antenna selection of Port A in what appea...
by Paul
Wed Sep 13, 2017 2:19 pm
Forum: SDR Antennas
Topic: RA0SMS Miniwhip bad performance on SDRPlay
Replies: 31
Views: 10390

Re: RA0SMS Miniwhip bad performance on SDRPlay

I am strictly non-technical, but this is my experience -I also have one of these antennas feeding my RSP2. As this receiver has a choice of three ports, it is attached to Port A. Port B is a H/V/UHF discone and an end-fed longwire (with a 9:1 balun) is attached via the HI-Z Port. In summation, with ...
by Paul
Fri Sep 01, 2017 7:29 pm
Forum: General
Topic: Windows 10 professional & SDRUno
Replies: 8
Views: 1522

Re: Windows 10 professional & SDRUno

Thaks for the suggestion Andy
However, in this case this is not the aswer I'm afraid.
To be honest, I still suspect this laptop and will, for the present at least go back to the relaible one, shelving the suspect until I have the patience to have another protracted go.
All the best
Paul
by Paul
Fri Sep 01, 2017 7:16 am
Forum: General
Topic: Windows 10 professional & SDRUno
Replies: 8
Views: 1522

Re: Windows 10 professional & SDRUno

Having finally got my RSP up and running on my second Dell laptop (Running Windows 10 pro), all is working well so far with this instal, except for signal corruption in SAM mode. If anyone has a suggestion to remedy this, it would be appreciated - I'm out of my depth here. The original installation ...
by Paul
Mon Aug 28, 2017 6:00 am
Forum: General
Topic: Windows 10 professional & SDRUno
Replies: 8
Views: 1522

Re: Windows 10 professional & SDRUno

Thanks Mike and Heinrich 1. To be honest, having got a bit frustrated with the "pro" machine - it wasn't physically connected when I looked in response to Mike's post. 2. The use of the EXTIO was an attempt to see what would happen if it was accessed - and I was a little surprised at the r...
by Paul
Sat Aug 26, 2017 7:00 pm
Forum: General
Topic: Windows 10 professional & SDRUno
Replies: 8
Views: 1522

Re: Windows 10 professional & SDRUno

Thanks Mike
You're right!
Why didn't I think of doing that??
Now to find out how to remedy that if possible.
Cheers
Paul
by Paul
Wed Aug 23, 2017 6:46 pm
Forum: General
Topic: Windows 10 professional & SDRUno
Replies: 8
Views: 1522

Windows 10 professional & SDRUno

Greetings Is there a known issue with Windows 10 professional and SDRUno? I have two Dell laptops, both running Windows 10, one of which happily runs Uno and other programmes that will run an RSP2. However, the second machine, with the Windows 10 professional edition will not run SDRUno. The program...
by Paul
Thu Aug 17, 2017 7:31 pm
Forum: General
Topic: Which Windows 10 SDR Software(s) Work with the RSP2?
Replies: 10
Views: 1887

Re: Which Windows 10 SDR Software(s) Work with the RSP2?

What Andy said works very well for me - arrived at it independently. The only difference is that I mostly start off with 250 K on the Sp1 display, sometimes reducing it a little to suit the area of spectrum that I'm looking at but for ultimate signal resolution, I can't imagine improving on the SP2 ...
by Paul
Sat Aug 12, 2017 6:03 am
Forum: New Users' experiences
Topic: Saving a Workspace
Replies: 8
Views: 1457

Re: Saving a Workspace

Sorry octave, you're quite correct, got my SDRPlay's and SDRUno's scrambled.
by Paul
Thu Aug 10, 2017 9:48 pm
Forum: New Users' experiences
Topic: Saving a Workspace
Replies: 8
Views: 1457

Re: Saving a Workspace

Stunning!
Also SDRUno, cross-platform and free takes a bit of beating and please be aware that there are very useful SdrPlay insructional/informational videos on youtube.

Go to advanced search