Search found 513 matches

by sdrplay
Sat Feb 25, 2017 8:19 am
Forum: SDRplay related
Topic: "Failed to locate API registry entry"
Replies: 7
Views: 2349

Re: "Failed to locate API registry entry"

It's important to make sure the EXTIO dll is compatible with the API version. If you are not sure, then go to our downloads page and install either... EXTIO PLUGINS - VERSION 1.0 (if you want to use your existing HDSDR installation) or HDSDR – VERSION 2.76 (which contains HDSDR, API and EXTIO all in...
by sdrplay
Wed Feb 22, 2017 11:06 am
Forum: New Users' experiences
Topic: SDRuno on Linux
Replies: 15
Views: 8708

Re: SDRuno on Linux

What's important is how you have built the wxWidgets For me I have the following structure... /home/sdrplay/Dev/wxWidgets-3.1.0 /home/sdrplay/Dev/wxWidgets-staticlib so you need to be careful when building wxWidgets that the correct path for the output is specified. Then make sure that same path is ...
by sdrplay
Wed Feb 22, 2017 8:19 am
Forum: SDRplay related
Topic: [RSP2] Short-circuit resilience of the Bias-T?
Replies: 4
Views: 7061

Re: [RSP2] Short-circuit resilience of the Bias-T?

Thanks, I've made a note of it and it will be moved to the right on the next release.

Best regards,

SDRplay Support
by sdrplay
Wed Feb 22, 2017 8:16 am
Forum: SDRuno
Topic: Compatibility issues with SDRuno v1.2, HDSDR & SDR#
Replies: 4
Views: 1034

Re: Compatibility issues with SDRuno v1.2, HDSDR & SDR#

No it doesn't do a release when stop is pressed for the reason I mentioned above. There are firmware settings that need to be maintained. There are also other reasons on how it's been developed over the years that make that difficult to do.

Best regards,

SDRplay Support
by sdrplay
Tue Feb 21, 2017 6:14 pm
Forum: Code Corner
Topic: Raspberry Pi problem?
Replies: 18
Views: 2429

Re: Raspberry Pi problem?

Nope, I'm using the released API - I'm also using RSP2 as you mentioned RSP2 in an earlier post I thought? I'll try RSP1 but it should be the same.

Best regards,

SDRplay Support
by sdrplay
Tue Feb 21, 2017 4:47 pm
Forum: New Users' experiences
Topic: SDRuno on Linux
Replies: 15
Views: 8708

Re: SDRuno on Linux

Re: copy/paste - I suspect it's a browser thing? I can see differences depending on whether I use Chrome or MS Edge - however both copy/paste fine for me into either PuTTY or Virtual Machine.

I'll update the single dash issue - thanks.

Best regards,

SDRplay Support
by sdrplay
Tue Feb 21, 2017 4:41 pm
Forum: Code Corner
Topic: Raspberry Pi problem?
Replies: 18
Views: 2429

Re: Raspberry Pi problem?

Try adding -O3 to your build command - the API is build with that level of optimisation. I use that by default in my apps.

Best regards,

SDRplay Support
by sdrplay
Tue Feb 21, 2017 11:38 am
Forum: Code Corner
Topic: Raspberry Pi problem?
Replies: 18
Views: 2429

Re: Raspberry Pi problem?

I noticed that you never terminate correctly. You need to capture ctrl-C for example and perform a StreamUninit();

Failure to do that will give you problems for any subsequent use - you will need to disconnect and reconnect the device if you don't StreamUninit

Best regards,

SDRplay Support
by sdrplay
Tue Feb 21, 2017 11:33 am
Forum: SDRuno
Topic: Different Band on each receiver
Replies: 6
Views: 1058

Re: Different Band on each receiver

To cover those frequencies I would... VRX0: Frequency = 4.6MHz Sample Rate = 6MHz (just leave VRX0 sitting there) - you can increase the sample rate if you need to see more spectrum. VRX1: Frequency = 1.8MHz VRX2: Frequency = 7.4MHz Then just use VRX1 and VRX2 to view each band (make sure they are e...
by sdrplay
Tue Feb 21, 2017 11:22 am
Forum: Code Corner
Topic: Raspberry Pi problem?
Replies: 18
Views: 2429

Re: Raspberry Pi problem?

Have you tried a different USB cable? Or different USB port? Are you using a port sharing hub? If so, connect directly to see if that's the problem.

Best regards,

SDRplay Support

Go to advanced search