Search found 769 matches

by sdrplay
Sun Mar 04, 2018 8:24 am
Forum: General
Topic: SDRPlay RSP1/2, SoapyRemote, CubicSDR
Replies: 5
Views: 1252

Re: SDRPlay RSP1/2, SoapyRemote, CubicSDR

Couple of things... do you get the same problem running CubicSDR on the RPi3? (i.e. locally, not remotely) Also, is this on a wired lan? I'm working through a similar issue with some guys here: https://github.com/pothosware/SoapyRemote/issues/26 However, I understand the issue on Odroid. RPi should ...
by sdrplay
Sun Mar 04, 2018 8:19 am
Forum: Code Corner
Topic: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B
Replies: 25
Views: 7512

Re: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B

I'm not sure how that software works, do you have a file that shows how the RSP is configured - freq, gain, sample rate, bw, agc, etc.?

Best regards,

SDRplay Support
by sdrplay
Sat Mar 03, 2018 11:02 pm
Forum: General
Topic: SDRPlay RSP1/2, SoapyRemote, CubicSDR
Replies: 5
Views: 1252

Re: SDRPlay RSP1/2, SoapyRemote, CubicSDR

Not a known issue as far as I know. Can you post any debug information from the server? Can you also post what settings you are using in CubicSDR with the device?

Best regards,

SDRplay Support
by sdrplay
Sat Mar 03, 2018 10:51 pm
Forum: Code Corner
Topic: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B
Replies: 25
Views: 7512

Re: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B

200?! If you can post the RSP settings, I'll be able to help you with them.

Best regards,

SDRplay Support
by sdrplay
Fri Mar 02, 2018 7:27 pm
Forum: SDRplay related
Topic: RSP1 Linux 18.3 Cinammon Mint Install Problems
Replies: 41
Views: 5767

Re: RSP1 Linux 18.3 Cinammon Mint Install Problems

If you have a RSP1 have you blacklisted the kernel drivers? If you type... lsmod | grep msi and you see any output then you need to blacklist the drivers as per instructions found earlier in this thread. If not, can you post what you are seeing from... SoapySDRUtil --info SoapySDRUtil --find=sdrplay...
by sdrplay
Wed Feb 28, 2018 7:40 pm
Forum: SDRplay related
Topic: Automatic LNA settings w/band
Replies: 5
Views: 1348

Re: Automatic LNA settings w/band

On the RSP1A, the RF Gain reduction range changes from 0-6 below 60 MHz to 0-9 above 60 MHz, the position of the slider looks like it's changing because the range changes. However if you were at setting 3 lower than 60 MHz, you will still be at setting 3 above 60 MHz. Ideally you should be at 0 (max...
by sdrplay
Wed Feb 28, 2018 1:11 am
Forum: SDRuno
Topic: CubicSDR-0.2.0-win64.exe
Replies: 1
Views: 459

Re: CubicSDR-0.2.0-win64.exe

You most likely will have to copy mir_sdr_api.dll from the API installation directory into the CubicSDR installation directory. If you have the 64bit version of CubicSDR then you will probably need the 64bit API dll (there will be x86 and x64 directories)

Best regards,

SDRplay Support
by sdrplay
Tue Feb 27, 2018 2:18 pm
Forum: SDRplay related
Topic: RSP1 Linux 18.3 Cinammon Mint Install Problems
Replies: 41
Views: 5767

Re: RSP1 Linux 18.3 Cinammon Mint Install Problems

Just to follow up on the resolution...

I remotely connected in and removed the audio driver from the SoapySDR installation. This allowed the SDRplay driver to be seen and initial tests show it working.

Best regards,

SDRplay Support
by sdrplay
Mon Feb 26, 2018 11:38 pm
Forum: SDRplay related
Topic: RSP1 Linux 18.3 Cinammon Mint Install Problems
Replies: 41
Views: 5767

Re: RSP1 Linux 18.3 Cinammon Mint Install Problems

When you say that you can't see it, do you mean the device or the modules directory? SoapySDRUtil --info only shows you how SoapySDR is configured. If that report is showing sdrplay driver as being installed, then you want to use either... SoapySDRUtil --find=sdrplay or SoapySDRUtil --probe=sdrplay ...
by sdrplay
Mon Feb 26, 2018 11:09 pm
Forum: SDRplay related
Topic: RSP1 Linux 18.3 Cinammon Mint Install Problems
Replies: 41
Views: 5767

Re: RSP1 Linux 18.3 Cinammon Mint Install Problems

In your SoapySDRUtil outputs, they show... Search path: /usr/local/lib/SoapySDR/modules0.7 Module found: /usr/local/lib/SoapySDR/modules0.7/libaudioSupport.so (58fb1b5) Module found: /usr/local/lib/SoapySDR/modules0.7/libremoteSupport.so (0.5.0-1c544fe) Module found: /usr/local/lib/SoapySDR/modules0...

Go to advanced search