Search found 127 matches

by 13dka
Mon Mar 13, 2017 7:54 pm
Forum: General
Topic: Interference identification?
Replies: 37
Views: 6994

Re: Interference identification?

Well this thread must be jinxed...I enjoyed mostly unharmed reception until this weekend but now... :( ...exact 1 second pulses from 0 to 10 MHz and some dense muck between 2 and 3 MHz... interference_since_20170310.jpg ...level-wise centered at 5 MHz (check the faint peak hold line on the spectrum ...
by 13dka
Sun Mar 12, 2017 3:08 am
Forum: General
Topic: Interference identification?
Replies: 37
Views: 6994

Re: Interference identification?

Oh, thank you. That makes sense: we've had a new neighbour move in recently. Looks as if I'll just have to put up with it. :( I think what you see there on the screenshots (thanks for them, nice examples I may refer to in future discussions!) is an idling PLC modem. In other words, it could get mor...
by 13dka
Sun Mar 12, 2017 1:28 am
Forum: SDRplay related
Topic: SDRSharp Zoom FFT not working at all
Replies: 5
Views: 1465

Re: SDRSharp Zoom FFT not working at all

For example - SDRUno was brought up for the RSP1. I'd love to see it have an audio output to feed RDSSpy (192kHz sampling rate needed) and other stuff such as a scanner. Hopefully it will happen one day - but the RSP2 was brought out and no doubt all the resources went to getting that working on SD...
by 13dka
Thu Mar 09, 2017 11:47 pm
Forum: SDRplay related
Topic: SDRplay and SDR sharp
Replies: 11
Views: 3595

Re: SDRplay and SDR sharp

The files are just zipped program directories made from an existing install, so you just need to unzip/copy them to some place. The v2.2 ExtIO plug-in works only with SDR#v1411 and higher (as indicated by the "SDR# v1411+" ), you need to install the other one.
by 13dka
Thu Mar 09, 2017 8:17 am
Forum: SDRplay related
Topic: SDRplay and SDR sharp
Replies: 11
Views: 3595

Re: SDRplay and SDR sharp

Not sure about Win10, it occasionally needs to be run in XP compatibility mode on Win7 already (doesn't want to start otherwise) and there are some quirks with the ExtIO plug-in (in particular with the RSP2), best practice (for me) is to never activate the HiZ input and just use it for the stuff abo...
by 13dka
Wed Mar 08, 2017 9:07 am
Forum: SDRplay related
Topic: SDRplay and SDR sharp
Replies: 11
Views: 3595

Re: SDRplay and SDR sharp

by 13dka
Sat Mar 04, 2017 10:58 pm
Forum: SDRuno
Topic: Some thoughts on SDRUno.
Replies: 5
Views: 1251

Re: Some thoughts on SDRUno.

I think you used UI or font scaling to compensate for the tiny display of fonts on your high resolution, that's why some UI elements fall apart. This is not helping you in any way, sorry but what you see is what most buyers of the latest "Retina" "UHD" and whatnot high-DPI fads a...
by 13dka
Sat Mar 04, 2017 5:34 am
Forum: SDRuno
Topic: ASIO driver?
Replies: 2
Views: 851

Re: ASIO driver?

I'm not familiar with JACK and whether or not it provides a wrapper functionality like ASIO4ALL but ASIO has nothing to do with routing audio between applications (it rather impedes that, but that's a different story). I'm getting good results (on Win 7 x64) with this (donationware) audio cable gizm...
by 13dka
Fri Mar 03, 2017 2:31 am
Forum: SDRuno
Topic: SDRUno recording settings?
Replies: 10
Views: 1856

Re: SDRUno recording settings?

As long you're in Low IF mode, LO frequency=tuner frequency should not matter. Where (what program) are you trying to play the recorded file? Unfortunately SDRuno doesn't record audio files (yet), only I/Q files so you can only play them back in SDRuno (and possibly other SDR software).
by 13dka
Thu Feb 23, 2017 1:39 am
Forum: SDRplay related
Topic: [RSP2] Short-circuit resilience of the Bias-T?
Replies: 4
Views: 7572

Re: [RSP2] Short-circuit resilience of the Bias-T?

Thank you very much1

Go to advanced search