SDRplay Community Forum

Hello Cyulo1, Your best bet would be to open up a support ticket via www.sdrplay.com/support/ You will need to provide your device serial number, where you purchased it (so that we can assign a support agent in the right geography for you) and ideally screen shots showing your settings and spectrum ...

That's an excellent suggestion Lou.

Sincerely

SDRplay Tech_Support

Hello Jim, There is a strong chance that you could damage your RSP2. The separation in frequencies will not help you as it is RF power at the front end of your RSP2 that is the issue. Any more than +10 dBm (10mW) for short durations could end up damaging your device. If you really need full duplex o...

Hello Paul, Many thanks for this. The I/Q recording feature currently available in SDRuno, essentially records the signal that is provided to SDRuno via the USB interface from the tuner/ADC. This represents the total RF spectrum that is viewable within the SP1 window along with all of the modulated ...

Hello again Paul, If you could give us your precise sequence of steps, we might be able to understand what is going on here. What should happen and what does happen when we do this is that when you select the input option to be a WAV file, you get asked which WAV file you want to play. When you open...

Hello Paul, Can you open up a support ticket on this? We simply do not see what you describe. I can make a recording with the LO at say 7 MHz, switch the frequency to say to the 20m band for a while, then go back and select WAV file as the input and select my recording and it displays the LO at 7 MH...

https://forums.radioreference.com/softw ... eview.html

Sincerely

SDRplay Tech_Support

Hello Martin, We cannot find a problem with CW AFC. We are wondering whether the problem that you are having is caused by there being multiple CW signals within the SP2 bandwidth and the AFC algorithm, is having difficulty in locking to a specific signal. The AFC locking does have a long time consta...

The original application required 8 MHz sampling for TV signals and it is simply not possible to put 14 bits I and Q sampling through a USB 2.0 interface at 8 MHz and so 14 bit operation was not considered to be of any value at the time. That is why 14 bit mode is limited to 6 MHz sampling. The 10.4...

Hello Paul314,
This is not a support forum. For support, please open up a support ticket at the url shown in the banner at the top of the page and we will try to help you.

Regards

SDRplay