Search found 35 matches
Re: IF GAIN
A significant disadvantage in disabling IF AGC is exposing vulnerability to overdriving the ADC which leads to nasty things like images, intermodulation products and possibly de-sensing signals of interest. I think the overdrive warning flag doesn't work if you disable IF AGC, so you won't know the ...
- Sun Jun 11, 2017 12:30 pm
- Forum: SDRuno
- Topic: SDRUno Recording - Bandwidth and Timer Function
- Replies: 1
- Views: 7013
Re: SDRUno Recording - Bandwidth and Timer Function
The recording spectrum is determined by the sample rate and decimation you've selected in the Main window, it's the same as "Final SR". The recorder seems to simply write the post-decimation data stream as a WAV file - there are no supplemental sampling controls in the Recorder function. You cannot ...
- Sun Jun 11, 2017 12:21 pm
- Forum: SDRplay related
- Topic: Record fails with "Unable to create a new output WAV file"
- Replies: 1
- Views: 8619
Re: Record fails with "Unable to create a new output WAV file"
Check your setup. First thing I'd look for is whether the folder path you've specified actually still exists. Does your target drive have enough free space. Creating the WAV file may require Windows to reserve disc space & you don't have enough the process will fail. This happens if your target driv...
- Sat Jun 10, 2017 1:23 am
- Forum: SDRuno
- Topic: Erratic RF Gain control
- Replies: 6
- Views: 20662
Re: Erratic RF Gain control
Actually, I've developed an SDRUno user guide, albeit incomplete, that's available from my Dropbox: https://www.dropbox.com/sh/nz5t2x9ge8td1o2/AACv0z1hKxSJJo6v0OWKg3-pa?dl=0 I've posted this link in the "new users" forum as well. It's in LibreOffice Calc .ods format. As mentioned, it is incomplete, ...
- Sun Jun 04, 2017 12:23 pm
- Forum: New Users' experiences
- Topic: Operation Difficulties
- Replies: 5
- Views: 17079
Re: Operation Difficulties
I've taken some time going through each and every indicator and control on SDRUno V1.13 and created a spreadsheet in an attempt to explain all of them. There are some points that are still in question so this is a work in progress. The spreadsheet is in OpenText .ods format and you can get it from m...
- Tue May 30, 2017 2:01 pm
- Forum: SDRuno
- Topic: Channel Skew Adjustment Procedure
- Replies: 4
- Views: 14128
Re: Channel Skew Adjustment Procedure
g1hbe: I did some adjustments after finding a VHF signal 50 dB. above the noise and managed to null out the image with some amplitude and phase adjustment, so thanks again for your guidance. The adjustment wasn't much, only a tick on amplitude and about 1.3 deg in phase. There are four slider select...
- Sun May 28, 2017 8:14 pm
- Forum: SDRuno
- Topic: Erratic RF Gain control
- Replies: 6
- Views: 20662
Erratic RF Gain control
Is it just me, or do others find the RF Gain (Gain Reduction) control on the Main window to be inconsistent? With IF AGC enabled in Main-SETT-INPUT, moving the RF gain slider results in non-linear, and sometimes reversing, changes in Gain. E.g. at mid-range, it might report 40 dB. Gain, then 35 dB. ...
- Sun May 28, 2017 5:21 pm
- Forum: SDRuno
- Topic: Ctrl Panel & Main SP different freq.
- Replies: 7
- Views: 21367
Re: Ctrl Panel & Main SP different freq.
I think you've got it. In essence, you can tune the VFO of any VRX across: LO +/- SR/2 but not outside of that. Since the RSP has only one LO, you're limited to the bandwidth around it and no more. Look on the VRXs as taking a chunk out of the passband provided by the LO and sampling of the ADC and ...
- Sun May 28, 2017 1:35 pm
- Forum: SDRuno
- Topic: Ctrl Panel & Main SP different freq.
- Replies: 7
- Views: 21367
Re: Ctrl Panel & Main SP different freq.
You can tune a VRX only within the sampling rate bandwidth centred on the LO of VRX0. In your case, VRX-0 sets the LO to 446.753637 MHz. and you're using a sampling rate of 10 MHz. That means the VFO tuning range of <ALL> VRXs is limited to 446.753637 +/- 5 MHz, or roughly 441.75 to 451.75 MHz. You ...
- Sun May 28, 2017 1:09 pm
- Forum: SDRuno
- Topic: Channel Skew Adjustment Procedure
- Replies: 4
- Views: 14128
Re: Channel Skew Adjustment Procedure
Thanks. I'm not seeing any images although the noise floor is only ~35 dB. below the strongest signals I can find so I guess the settings are ok where they are. Curious that in my case (RSP2 pro) the residual LO level is much better with automatic I/Q correction disabled and setting the controls to ...