Hello Heinrich,
Can you open up a support ticket at www.sdrplay.com/support? There is some debug data that we would like to collect.
Sincerely
Tech_Support
Search found 499 matches
- Tue Apr 09, 2019 5:41 pm
- Forum: SDRuno
- Topic: api_Service not Responding. What To Do, Please ?
- Replies: 10
- Views: 47342
- Tue Apr 09, 2019 1:38 pm
- Forum: SDRuno
- Topic: RX Output device - make the choice more immediate
- Replies: 4
- Views: 15573
Re: RX Output device - make the choice more immediate
Hello Alessandro,
The process of changing the Audio Output Device has been simplified in release 1.31 and it is now no longer necessary to stop and restart the stream.
Sincerely
Tech_Support
The process of changing the Audio Output Device has been simplified in release 1.31 and it is now no longer necessary to stop and restart the stream.
Sincerely
Tech_Support
- Sat Apr 06, 2019 3:14 pm
- Forum: SDRplay related
- Topic: SAP and DEC
- Replies: 1
- Views: 9595
Re: SAP and DEC
Hello Sabrina1984, This simply means you have selected one of the band framing buttons. This puts you in Low IF mode and removes both of the sample rate and decimation options. To get both back, simply un-frame the band and then open up the Main Panel settings (SETT button) and select Zero IF for th...
- Thu Apr 04, 2019 1:02 pm
- Forum: SDRplay related
- Topic: Dump 1090 issues
- Replies: 6
- Views: 19988
Re: Dump 1090 issues
I think you slightly misunderstand me. What I was saying is that if you want to use dump1090 AND SDRuno at the same time, you will need either two RSPs or a RSPduo as each software package requires a single tuner.
You can use dump1090 on its own with ANY RSP.
Sincerely
Tech_Support
You can use dump1090 on its own with ANY RSP.
Sincerely
Tech_Support
- Sun Mar 31, 2019 9:12 pm
- Forum: SDRuno
- Topic: Not sure what's going on with 2 meter framing button
- Replies: 2
- Views: 12105
Re: Not sure what's going on with 2 meter framing button
This was an error in the re-definition of the band framing buttons. It'll be fixed on the next release.
Sincerely
Tech_Support
Sincerely
Tech_Support
- Sat Mar 30, 2019 5:11 pm
- Forum: SDRplay related
- Topic: Dump 1090 issues
- Replies: 6
- Views: 19988
Re: Dump 1090 issues
Dump1090 is a standalone program and does not use SDRuno. Ay attempts to run both programs at the same time will not work unless you are using a RSPduo.
Sincerely
Tech_Support
Sincerely
Tech_Support
- Fri Mar 29, 2019 6:10 pm
- Forum: New Users' experiences
- Topic: S-METER READING
- Replies: 15
- Views: 46017
Re: S-METER READING
Bas, The S-meter gives a measurement of the total signal power within the demodulation bandwidth. It is incapable of distinguishing between wanted signal and interference within the same bandwidth and so it is perfectly possible to have a reading of s9+20 and have a barely audible signal. S-meters g...
- Fri Mar 29, 2019 7:33 am
- Forum: SDRuno
- Topic: SDRuno automatically resets Zero IF to Low IF on every single band change
- Replies: 5
- Views: 18653
Re: SDRuno automatically resets Zero IF to Low IF on every single band change
Low IF is a better option for the band presets for the HF bands and lower as it results in fewer spurious mixing products from the block converter that is used for covering HF. This is explained in the following application note: https://www.sdrplay.com/docs/SDRplay_Optimising_Performance_RSP1A_LF_M...
- Thu Mar 28, 2019 9:52 pm
- Forum: SDRuno
- Topic: Scanning UHF Freqs appears not to work ?
- Replies: 3
- Views: 13325
Re: Scanning UHF Freqs appears not to work ?
Hello Stevejerome, You have quite a low gain setting. Why did you set it so low? it will raise the noise floor significantly and degrade the SNR. I cannot see any signals that are greater than your threshold level in your SP1 window. I would try increasing your gain and lowering your threshold. You ...
- Thu Mar 28, 2019 7:04 pm
- Forum: SDRuno
- Topic: Scanning UHF Freqs appears not to work ?
- Replies: 3
- Views: 13325
Re: Scanning UHF Freqs appears not to work ?
Hello Stevejerome
Have you set the threshold value correctly?
Post a screenshot of your configuration Window along with your SP1 display and people may be able to advise you.
Sincerely
Tech_Support
Have you set the threshold value correctly?
Post a screenshot of your configuration Window along with your SP1 display and people may be able to advise you.
Sincerely
Tech_Support