SDRplay Community Forum

Left and right click or scroll in the Freq and BW fields for N3 or N4

Best regards,

SDRplay Support

N1 through to N4 are set in the top of the EX control window.

Best regards,

SDRplay Support

This is currently not possible. It's on our list to support individual RX control panel frequencies and setup in a future release.

Best regards,

SDRplay Support

Click on the EXW button in the RX control panel and at the top of the EX window you can specify the bandwidth and frequency of the 4 notch filters.

Best regards,

SDRplay Support

I just did a small test with 64MB files and it does automatically load one after the other if you don't have the repeat button enabled.

Best regards,

SDRplay Support

PPM calibration is in SETT->CAL from within the Main Window.

Best regards,

SDRplay Support

The first 0 represents the instance of SDRuno currently running. If you have more that one instance this value increases but they are 'aware' of each other for things like CAT and OmniRig control. The 00 represents the VRX that you are currently using so that you can keep track of what VRX the vario...

The SP1 window currently has 5 levels of zoom. We'll be looking at that for future versions. If you start with a smaller amount of bandwidth then you'll be able to zoom in closer.

Best regards,

SDRplay Support

There could be a few things...

Mute (orange slider and button at the bottom of the RX control panel)
Default output device not set to speakers or headphones (whatever you are using)
In the Rx control window, click on SETT->OUT and set the output device

Best regards,

SDRplay Support

If you let me know what your settings are (you can send a screenshot to support@sdrplay.com) I can let you know if it's optimum from a CPU point of view. Also, make sure the PERF button is OFF

Best regards,

SDRplay Support