Search found 37 matches
- Thu Aug 17, 2017 12:28 pm
- Forum: General
- Topic: Which Windows 10 SDR Software(s) Work with the RSP2?
- Replies: 10
- Views: 39745
Re: Which Windows 10 SDR Software(s) Work with the RSP2?
Thank you. That's some great insight you've passed on.
- Wed Aug 16, 2017 10:24 pm
- Forum: General
- Topic: Which Windows 10 SDR Software(s) Work with the RSP2?
- Replies: 10
- Views: 39745
Re: Which Windows 10 SDR Software(s) Work with the RSP2?
Perhaps you could tell us how much zoom you need? I use SDRuno and can zoom in so the main display is 75KHz wide. For me, that is plenty enough to see individual SSB or CW transmissions.
- Thu Aug 03, 2017 2:33 am
- Forum: General
- Topic: Using the MFJ-1708 T/R switch?
- Replies: 4
- Views: 19654
Re: Using the MFJ-1708 T/R switch?
Hi Hank, Yes that could well be enough but if it is not then you may have a more difficult problem to solve. If you have the test gear you should measure what you get a REC1 with 100W TX. If you can't get an answer from MFJ I would do that measurement, and, because I always consider "what if?", I wo...
- Wed Aug 02, 2017 7:57 am
- Forum: General
- Topic: Using the MFJ-1708 T/R switch?
- Replies: 4
- Views: 19654
Re: Using the MFJ-1708 T/R switch?
Hi Hank, The maximum continuous input to the RSP is 0dBm. 100W is +50dBm so your relay must have at least 50dB isolation to get you to the upper limit of what the RSP can handle. You need to satisfy yourself that the relay has the required isolation. I see the REC1 port is grounded during transmit s...
- Fri Jul 21, 2017 10:40 pm
- Forum: General
- Topic: RSP2 Frequency is Incorrect
- Replies: 4
- Views: 16323
Re: RSP2 Frequency is Incorrect
Asked a couple of questions Would calibration address the problem and if so, must it be done with every application? Also, to address the problem correctly, what are the last three digits of the frequency - 162.555.200 - the .200 in this set? 1) Yes, calibration will address the frequency accuracy ...
- Thu Jul 13, 2017 8:28 pm
- Forum: New Users' experiences
- Topic: Use with Ham Transceiver?
- Replies: 3
- Views: 14841
Re: Use with Ham Transceiver?
I don't know your name. The remote connector on the back of your rig has a set of relay contacts that could be used to control a coax relay or similar. Check page 77 of the TS480 instruction manual. The coax relay would switch the antenna between the rig transmitter and the SDR. Of course, you need ...
- Sun Jul 02, 2017 2:03 am
- Forum: SDRuno
- Topic: SDRuno band buttons
- Replies: 3
- Views: 13295
SDRuno band buttons
Hi All, It seems the point of the band buttons is to quickly get you to a specific amateur band. The default action is probably not the best for some people. Is there a way to configure how the band buttons work in SDRuno and can any of the following be changed? Default span - some bands are wider t...