SDRplay Community Forum

Excellent, If you have issues and need to reset again, you can move your favorites from the User files folder.

Yes, remove the offset in console. It might be global or as a list ditch effort perform a complete reset.
https://www.sdr-radio.com/Support/FullReset
https://www.sdrplay.com/docs/SDRplay_Software_reset.pdf

I am confused, Is your RSP2 working ok in SDRuno and SDR-Console but your other devices have issues?

I believe the PDBPF is a band-pass filter with the cutoffs assigned via the LC (lowcut) and HC (highcut) values in the EX CONTROL panel.
https://imgur.com/a/4iGnFjS

The only option of know of that will allow the above to work is VSPE. In VSPE creating a com port spiltter.

http://www.eterlogic.com/Products.VSPE.html

https://imgur.com/hfjHeRv

I have found the default volume level in Uno to be good. If you crank it near max it will distort. I have my Windows output volume at 100%
I leave Uno's volume alone and adjust my speakers volume as needed.

When I listen to FM broadcast stations 87.9–107.9 I use ZERO IF mode (MAIN panel) @ 5 Mhz of bandwidth with the RF GAIN at max. I give myself separation between the TUNE and the LO I set the RX control for FM/SWFM/192k. If the station is weak but in Stereo. I use the FMS noise reduction from the EX ...

The e4000 2832 dongle is RTL based so you will need to use the associated EXT/IO dll driver placed in your My Documents folder. http://www.hdsdr.de/hardware.html To use SDRuno with this device, you must use SDRuno v1.22 https://www.sdrplay.com/downloads . This version of SDRuno has two editions. You...

I forgot to add the following that SDRuno auto populates its panels based on preset resolutions. This is valid only for an unaltered "default" workspace. Which is workspace 0 Try the following. Lower your system resolution Launch SDRuno Select an unused Workspace from the MAIN panel. 1-9 You will on...

You can try lowering your systems display resolution.