Search found 191 matches
- Mon Jul 22, 2019 12:26 pm
- Forum: General
- Topic: Always 125 MHZ Offset!
- Replies: 6
- Views: 24894
Re: Always 125 MHZ Offset!
Excellent, If you have issues and need to reset again, you can move your favorites from the User files folder.
- Sun Jul 21, 2019 4:50 pm
- Forum: General
- Topic: Always 125 MHZ Offset!
- Replies: 6
- Views: 24894
Re: Always 125 MHZ Offset!
Yes, remove the offset in console. It might be global or as a list ditch effort perform a complete reset.
https://www.sdr-radio.com/Support/FullReset
https://www.sdrplay.com/docs/SDRplay_Software_reset.pdf
https://www.sdr-radio.com/Support/FullReset
https://www.sdrplay.com/docs/SDRplay_Software_reset.pdf
- Sun Jul 21, 2019 3:01 pm
- Forum: General
- Topic: Always 125 MHZ Offset!
- Replies: 6
- Views: 24894
Re: Always 125 MHZ Offset!
I am confused, Is your RSP2 working ok in SDRuno and SDR-Console but your other devices have issues?
- Fri Jul 19, 2019 9:42 pm
- Forum: SDRuno
- Topic: my problem with ..uno
- Replies: 8
- Views: 31103
Re: my problem with ..uno
I believe the PDBPF is a band-pass filter with the cutoffs assigned via the LC (lowcut) and HC (highcut) values in the EX CONTROL panel.
https://imgur.com/a/4iGnFjS
https://imgur.com/a/4iGnFjS
- Fri Jul 19, 2019 9:32 pm
- Forum: Rig Control
- Topic: Port Sharing or use USB and COM port with a TS 590S
- Replies: 2
- Views: 36855
Re: Port Sharing or use USB and COM port with a TS 590S
The only option of know of that will allow the above to work is VSPE. In VSPE creating a com port spiltter.
http://www.eterlogic.com/Products.VSPE.html
https://imgur.com/hfjHeRv
http://www.eterlogic.com/Products.VSPE.html
https://imgur.com/hfjHeRv
- Mon Jul 15, 2019 9:37 pm
- Forum: New Users' experiences
- Topic: adjust bandwidth for WFM
- Replies: 5
- Views: 46602
Re: adjust bandwidth for WFM
I have found the default volume level in Uno to be good. If you crank it near max it will distort. I have my Windows output volume at 100%
I leave Uno's volume alone and adjust my speakers volume as needed.
I leave Uno's volume alone and adjust my speakers volume as needed.
- Mon Jul 15, 2019 7:32 pm
- Forum: New Users' experiences
- Topic: adjust bandwidth for WFM
- Replies: 5
- Views: 46602
Re: adjust bandwidth for WFM
When I listen to FM broadcast stations 87.9–107.9 I use ZERO IF mode (MAIN panel) @ 5 Mhz of bandwidth with the RF GAIN at max. I give myself separation between the TUNE and the LO I set the RX control for FM/SWFM/192k. If the station is weak but in Stereo. I use the FMS noise reduction from the EX ...
- Wed Jul 10, 2019 1:13 pm
- Forum: New Users' experiences
- Topic: can't get sdrplay to work with e4000 2832 dongle
- Replies: 5
- Views: 45775
Re: can't get sdrplay to work with e4000 2832 dongle
The e4000 2832 dongle is RTL based so you will need to use the associated EXT/IO dll driver placed in your My Documents folder. http://www.hdsdr.de/hardware.html To use SDRuno with this device, you must use SDRuno v1.22 https://www.sdrplay.com/downloads . This version of SDRuno has two editions. You...
- Sun Jul 07, 2019 12:55 am
- Forum: SDRuno
- Topic: make sdruono easier to read
- Replies: 2
- Views: 11218
Re: make sdruono easier to read
I forgot to add the following that SDRuno auto populates its panels based on preset resolutions. This is valid only for an unaltered "default" workspace. Which is workspace 0 Try the following. Lower your system resolution Launch SDRuno Select an unused Workspace from the MAIN panel. 1-9 You will on...
- Sat Jul 06, 2019 11:40 pm
- Forum: SDRuno
- Topic: make sdruono easier to read
- Replies: 2
- Views: 11218
Re: make sdruono easier to read
You can try lowering your systems display resolution.