Search found 29 matches
- Tue Dec 27, 2016 10:41 am
- Forum: General
- Topic: Stuttering - Skipping RSP2/SDRUno
- Replies: 4
- Views: 14257
Re: Stuttering - Skipping RSP2/SDRUno
Also you might try decreasing the zoom in the SP1 window.
- Sun Dec 25, 2016 8:22 pm
- Forum: SDRplay related
- Topic: Installing either SRDuno or EXTIO.dll causes other to fail
- Replies: 0
- Views: 5109
Installing either SRDuno or EXTIO.dll causes other to fail
Installing either SDRuno 1.12 or the EXTIO plugin will allow the most recently installed one to work but causes the other one to quit working. i.e. 1. Install SDRuno and it works fine. 2. Install EXTIO and HDSRD and SDRSharp both work fine but SDRuno no longer works. 3. Re-install SDRuno and it work...
- Tue Dec 13, 2016 8:44 pm
- Forum: General
- Topic: Half of my spectrum is constanly +30 dbz in the red!
- Replies: 7
- Views: 22524
Re: Half of my spectrum is constanly +30 dbz in the red!
Try UN-zooming all the way out. It looks like you might be zoomed in on the end of your IF passband.
- Tue Dec 13, 2016 8:34 pm
- Forum: SDRuno
- Topic: SDRUno RSP1 NB doesn't do much
- Replies: 6
- Views: 22410
Re: SDRUno RSP1 NB doesn't do much
I have found the NB to work best with the widest (8MHz) IF bandwidth. It's a trade off with noise as the noise gets better with higher decimation which of course reduces the IFBW. In some cases I've found a good trade-off compromise with a SR of 7 MHz and DEC of 4, only giving an IFBW of 1.5 MHz but...
- Tue Dec 13, 2016 8:21 pm
- Forum: SDRuno
- Topic: Deemphasis: Surplus button?
- Replies: 2
- Views: 13593
Re: Deemphasis: Surplus button?
The "50uS", "75uS" and "OFF" are for broadcast WFM and SWFM. The "DEEM" is a toggle for all other FM modes.
- Sat Dec 03, 2016 8:48 pm
- Forum: SDRplay related
- Topic: Blocks & Schematics?
- Replies: 3
- Views: 13213
Re: Blocks & Schematics?
YES, PLEASE!
- Fri Dec 02, 2016 10:01 am
- Forum: General
- Topic: RSP2 frequency calibration
- Replies: 5
- Views: 17053
Re: RSP2 frequency calibration
Yes, there seems to be a tracking problem. If you set the SR to 8, 9, or 10 MHz with a decimation of 1 this gives you an 8 MHz IF bandwidth which means that you can tune up to + or - 4 MHz from the LO. If you set the LO 4 MHz higher than WWV and tune to WWV (far left of display) you get a completely...
- Tue Nov 22, 2016 6:45 am
- Forum: SDRuno
- Topic: Multiple SDRuno Instances
- Replies: 2
- Views: 11409
Re: Multiple SDRuno Instances
Two instances can not control the same hardware so you would need another radio. That said, you can get one instance to span 8 MHz so you could cover 6.5-14.5 MHz and use multiple VRXs. To get 8 MHz coverage in the SP1 window use main window settings of at least 8 in the "SR (MHz)" drop down box and...
- Mon Nov 14, 2016 6:15 am
- Forum: SDRuno
- Topic: UTC 24 hour format?
- Replies: 7
- Views: 27079
Re: UTC 24 hour format?
UTC is ALWAYS in 24 hour format, that's the definition. Local time may or may not be in 24 hour format and should have NOTHING to do with the display of UTC time. AM or PM post-pended to UTC time is just wrong.