Bang for the buck...Depending on depth of pocket, processing power and how much much "real estate's available,'" a RSPDUO, a RSP2 and a RTLSDR (SCANNING) can give quite a bit of flexibility
e.g. 2 X HF & 2 X V/UHF or 3 X Hf & 1 X V/UHF or 4 V/UHF (not too shakey).
SP displays available at back.
Search found 355 matches
- Tue Jan 01, 2019 9:20 pm
- Forum: SDRuno
- Topic: It works. Three RX's for two WSJTX's and one RX to play with.
- Replies: 4
- Views: 13628
- Sun Dec 30, 2018 3:49 pm
- Forum: SDRuno
- Topic: Issues with Windows 10 for workstations...
- Replies: 3
- Views: 11975
Re: Issues with Windows 10 for workstations...
Be sure not to plug the RSP in during installation until prompted to do so. It seems that this may be a frequently made error and is likely to result in the issue that you have experienced.
- Sat Dec 29, 2018 8:40 pm
- Forum: SDR Antennas
- Topic: RSP2, SDRUno & the Wellbrook ALA1530 PE
- Replies: 1
- Views: 9545
Re: RSP2, SDRUno & the Wellbrook ALA1530 PE
Hi Stephanie Firstly, may I say that I am a relative novice "swl-er." However, I have amassed considerable experience of trying (and succeeding)to use a Wellbrook ALA1530(LN) on an RSP2- the same issues possibly applying, so here goes. I'm really chuffed with this antenna. However, I have had issues...
- Wed Dec 19, 2018 10:36 am
- Forum: SDRuno
- Topic: EXTio.exe missing
- Replies: 3
- Views: 10815
Re: EXTio.exe missing
May I suggest that you try SDR SHARP as an alternative, which is also an excellent programme that would support your device. Good luck.
- Tue Dec 18, 2018 11:15 am
- Forum: SDRplay related
- Topic: Binaural Reception ?
- Replies: 11
- Views: 37876
Re: Binaural Reception ?
Hi, I've never heard of that. It sounds (no pun intended) like a really useful function, if as I suspect it produces gradual tonal change, thus making the audibility of CW signals for instance capable of optimal adjustment. This ability may already be present and well known to real amateurs. amongst...
- Sun Dec 16, 2018 7:59 am
- Forum: SDRuno
- Topic: RSPDuo and SDRUNO 1.24
- Replies: 4
- Views: 11698
Re: RSPDuo and SDRUNO 1.24
I have found that in my case, using the RSPDuo and invoking the "Slave" receiver automatically produces exactly the following result (shown in the Manual extract below). Sadly, I cannot see any value in the rather messy (corrupted?) Auto-layout option that I am presented with, but it's easy to produ...
- Sat Dec 15, 2018 7:11 am
- Forum: SDRuno
- Topic: RSPDuo and SDRUNO 1.24
- Replies: 4
- Views: 11698
Re: RSPDuo and SDRUNO 1.24
Thank you for looking Support - I had hoped that someone may have an answer rather than raise a ticket(?). However, I can confirm that unfortunately invoking the second/slaved VRX/Tuner loads the following panels only. RX CONTROL/SP1/SP2. The Main & Memory panels are not loaded. I have made 4 screen...
- Fri Dec 14, 2018 9:37 pm
- Forum: SDRuno
- Topic: RSPDuo and SDRUNO 1.24
- Replies: 4
- Views: 11698
RSPDuo and SDRUNO 1.24
Having (almost) "cut my teeth on the excellent RSP2," I have now set up an RSPduo, dowloaded and insalled the software (very familiar with the process) and have run it very successfully in Single Tuner mode. I have previously not used a Master/Slave configuration, but have run into a couple of probl...
- Thu Nov 29, 2018 8:13 am
- Forum: SDRplay related
- Topic: use SDRplay as scanner with stored channels (frequencies)
- Replies: 1
- Views: 9177
Re: use SDRplay as scanner with stored channels (frequencies)
SDRuno does not currently include a scanning function. However, see the following. For information regarding scanning using SDRuno see: https://www.sdrplay.com/updated-sdrplay-software-road-map/ Specifically V1.3 Also, have a look at the memory panel functions (the intent seems to have always been t...
- Tue Nov 06, 2018 8:11 am
- Forum: SDRuno
- Topic: How can I get SDR Uno to remember the last windows that were open?
- Replies: 4
- Views: 14056
Re: How can I get SDR Uno to remember the last windows that were open?
Hi
You may find the user manual: 3.6 Managing Workspaces helpful.
Have fun...
You may find the user manual: 3.6 Managing Workspaces helpful.
Have fun...