Search found 18 matches
- Wed Oct 31, 2018 10:17 am
- Forum: SDRplay related
- Topic: Spurious signals every 12 MHz
- Replies: 5
- Views: 16395
Spurious signals every 12 MHz
Hi support, all, I noticed spurious signals on my RSPDuo, even when the antenna is disconnected and the antenna connector is closed on 50 Ohm termination. I used a PC battery powered and shut down all the other rigs in my home in order to avoid external disturbances. The spurious signals seems to be...
- Mon Oct 29, 2018 4:06 pm
- Forum: SDRplay related
- Topic: RSPduo and Dump1090 - Filters?
- Replies: 6
- Views: 17106
Re: RSPduo and Dump1090 - Filters?
Hi Andy, sorry it take so long, finally I had the time to test the new software and "wow!" finally it started very well (just double-clicking start8i) and immediately started listing tenths of aircrafters. With a second click I started the Virtual radar server and the browser map was immediately pop...
- Mon Oct 15, 2018 6:33 pm
- Forum: SDRplay related
- Topic: RSPduo and Dump1090 - Filters?
- Replies: 6
- Views: 17106
Re: RSPduo and Dump1090 - Filters?
Thanks, this is good and I look for the link. Please note that when I start SDRuno with Filters enabled it works like the filters are disabled, i.e. I have to disable the filters in SDRuno and then re-enable in order to have the filters working properly. Is this a known bug? Thanks Alessandro i2sva
- Sun Oct 14, 2018 9:00 am
- Forum: SDRplay related
- Topic: RSPduo and Dump1090 - Filters?
- Replies: 6
- Views: 17106
RSPduo and Dump1090 - Filters?
Hi readers and Support,
how can I set the mw/fm filter and/or the DAB filter on in Dump1090?
I tried the argument rspduoNotchEn (not sure it is the right one) but it always returns "Unknown or not enough arguments for option "rspduoNotchEn"
Thanks!
Alessandro i2sva
how can I set the mw/fm filter and/or the DAB filter on in Dump1090?
I tried the argument rspduoNotchEn (not sure it is the right one) but it always returns "Unknown or not enough arguments for option "rspduoNotchEn"
Thanks!
Alessandro i2sva
- Fri Oct 12, 2018 1:24 pm
- Forum: New Users' experiences
- Topic: RSPDuo and Dump1090 - help needed
- Replies: 5
- Views: 19889
Re: RSPDuo and Dump1090 - help needed
Hi Support,
strange enough, the SDRplay started after I run it from cmd line :
sdrplay_dump1090 --dev-sdrplay --interactive --net --oversample
Now it starts well every time also from windows by double clicking start8i, therefore the issue seems solved.
Thanks
Alessandro i2sva
strange enough, the SDRplay started after I run it from cmd line :
sdrplay_dump1090 --dev-sdrplay --interactive --net --oversample
Now it starts well every time also from windows by double clicking start8i, therefore the issue seems solved.
Thanks
Alessandro i2sva
- Fri Oct 12, 2018 12:45 pm
- Forum: New Users' experiences
- Topic: RSPDuo and Dump1090 - help needed
- Replies: 5
- Views: 19889
Re: RSPDuo and Dump1090 - help needed
Hi Support, **the start8i batch file has the following syntax: @echo off title CTRL-C to EXIT - v1.41 High Perf Interactive dump1090 .\DisableClose.exe .\sdrplay_dump1090.exe --dev-sdrplay --interactive --net --oversample pause **When I run start8i from the cmd line I get the following: Hex Mode Sqw...
- Wed Oct 10, 2018 7:27 pm
- Forum: New Users' experiences
- Topic: RSPDuo and Dump1090 - help needed
- Replies: 5
- Views: 19889
Re: RSPDuo and Dump1090 - help needed
Hi Roger, thanks for spotting the issue on dump1090 version, my fault! I have now removed ADS-B V1.3 and installed 1.41 but nothing has changed. Launching sdrplay_dump1090 the console start and suddenly close. Entering the console from the Command line I get the same error message as before "No supp...
- Tue Oct 09, 2018 4:43 pm
- Forum: New Users' experiences
- Topic: RSPDuo and Dump1090 - help needed
- Replies: 5
- Views: 19889
RSPDuo and Dump1090 - help needed
Hi all, can anyone help me? I am trying to set up DUMP1090 with RSPduo with/without SDRuno but no success at all. My O/S is Windows 10. I installed ADS-B (DUMP1090) V1.3 and the required API from SDRplay download page. I have tried both with API/HW driver V3.01 and with API/HW driver V2.13. Major is...