Search found 128 matches

by NN4F
Mon Sep 12, 2016 2:41 pm
Forum: SDRuno
Topic: SDRUno
Replies: 15
Views: 44678

Re: SDRUno

Testing the beta of 1.03 now, very stable, new filter widths for AM/SAM/USB. Monochrome waterfall available, better AGC routine, can run HF great with the AGC ON now with a -30 setpoint it performs great on some decent antenna's.... Just a few small bugs that we are reporting nothing major, should b...
by NN4F
Thu Jun 30, 2016 4:19 pm
Forum: SDRuno
Topic: Creating VRX Instance
Replies: 5
Views: 17982

Re: Creating VRX Instance

KF3F,

it will move if you have your bandwidth say at 2mhz wide, and as you move VRX0 down, if the band edge reaches the VRX1, then it will tune down also so best way is to set VRX0 in the middle of the band or whatever and then tune around on VRX1

Paul - NN4F
by NN4F
Tue Jun 21, 2016 9:44 pm
Forum: SDRuno
Topic: Wow, thanks!
Replies: 3
Views: 16072

Re: Wow, thanks!

If you are zoomed out the ribbon will not move, change by increasing the frequency on the RX panel, zoom in and the scale ribbon will slide
and to slide quicker, hold the shift key down...

Paul - NN4F
by NN4F
Tue Jun 21, 2016 9:42 pm
Forum: SDRuno
Topic: How to get going from that first SDRuno window which pops up
Replies: 1
Views: 13388

Re: How to get going from that first SDRuno window which pops up

I've also added a step by step start section to the cookbook
http://www.nn4f.com/sdruno-cookbook.pdf

Paul - NN4F
by NN4F
Tue Jun 21, 2016 9:40 pm
Forum: SDRuno
Topic: SDRuno, RTL-SDR, FIFI-SDR, Softrock, and Airspy
Replies: 6
Views: 29397

Re: SDRuno, RTL-SDR, FIFI-SDR, Softrock, and Airspy

Tyes if you disconnect the RSP, yo can load any extio, limited to 1mhz or under of bandwidth, so the RTL's max is 0.96Mhz, but they work great the rtl extio has an issue that the drop downs do not work, but click on it and you can use the cursor keys to change the value from 2.4Msps t 0.96 and then ...
by NN4F
Tue Jun 21, 2016 9:37 pm
Forum: SDRuno
Topic: Recording
Replies: 4
Views: 14488

Re: Recording

Its a folder permissions issue, by default stores in the program folder, this I believe is going to be changed, was reported during testing, same issue with the database files unless you change the database locations in the registry...

Paul - NN4F
by NN4F
Mon Jun 20, 2016 4:37 pm
Forum: SDRuno
Topic: Creating VRX Instance
Replies: 5
Views: 17982

Re: Creating VRX Instance

Each VRX has to be within the bandwidth of the VRX0 if you try and move say outside of the 8mhz bandwidth the second VRX will move also... You acnt have one on HF and the second on VHF...

Paul
by NN4F
Sun Jun 19, 2016 7:48 pm
Forum: SDRuno
Topic: Creating VRX Instance
Replies: 5
Views: 17982

Re: Creating VRX Instance

Hit stop so the RX is not running then hit ADD VRX in the Main Panel...

Paul - NN4F
by NN4F
Sun Jun 19, 2016 7:10 pm
Forum: SDRplay related
Topic: sdruno
Replies: 1
Views: 8406

Re: sdruno

Have you tried altering the FFT AVG and Waterfall Contrast on the SP1 windows settings?

Paul - NN4F
by NN4F
Wed Jun 08, 2016 7:37 pm
Forum: General
Topic: SDRplay-DXLABS Commander and TenTec Eagle
Replies: 3
Views: 13864

Re: SDRplay-DXLABS Commander and TenTec Eagle

use sdr-console and on external radio this uses omnirig to talk to the radio, and point dxlabs second cat to omnirig, hdsdr also works well, I use both on my FTdx3000 with dxlabs

Paul - NN4F