New User and Virtual Audio Cable
New User and Virtual Audio Cable
Greetings, I have just installed my new SDRplay, purchased at the 2016 UK National Hamfest. Really impressed, installed first time and up and running with no problems. This is my first use of any SDR kit and want to use a Virtual Audio Cable for data decoding to another application. Any recommendations on which VAC to use? I'm running Windows 10 on laptop.
Last edited by robert632 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: New User and Virtual Audio Cable
Try VB-Cable or HiFi-Cable from Vincent Burel
http://vb-audio.pagesperso-orange.fr/Cable/
It's donation ware.
You can also use VAC from Eugene Muzychenko.
http://software.muzychenko.net/eng/
It's commercial.
If your PC's soundcard has a Stereomix pin (sometimes this must be activated in the recording devices setup of Windows) you can feed its output into the decoding softwares. Then a VAC is only needed if you want to decode digital audio (like DRM radio).
73, Heinrich
http://vb-audio.pagesperso-orange.fr/Cable/
It's donation ware.
You can also use VAC from Eugene Muzychenko.
http://software.muzychenko.net/eng/
It's commercial.
If your PC's soundcard has a Stereomix pin (sometimes this must be activated in the recording devices setup of Windows) you can feed its output into the decoding softwares. Then a VAC is only needed if you want to decode digital audio (like DRM radio).
73, Heinrich
Reason: No reason
Re: New User and Virtual Audio Cable
Many thanks, I have installed VB-cable.
73 Robert
73 Robert
Last edited by robert632 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: New User and Virtual Audio Cable
A Thank you from me too. I hadn't researched this yet and now I don't have to.
Bill
Bill
Reason: No reason