New User and Virtual Audio Cable

Post your feedback here
Post Reply
robert632
Posts: 2
Joined: Thu Oct 06, 2016 2:53 pm

New User and Virtual Audio Cable

Post by robert632 » Thu Oct 06, 2016 3:04 pm

Greetings, I have just installed my new SDRplay, purchased at the 2016 UK National Hamfest. Really impressed, installed first time and up and running with no problems. This is my first use of any SDR kit and want to use a Virtual Audio Cable for data decoding to another application. Any recommendations on which VAC to use? I'm running Windows 10 on laptop.
Last edited by robert632 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

DanubeBCL
Posts: 203
Joined: Sat Jul 02, 2016 12:39 pm

Re: New User and Virtual Audio Cable

Post by DanubeBCL » Fri Oct 07, 2016 9:17 am

Try VB-Cable or HiFi-Cable from Vincent Burel
http://vb-audio.pagesperso-orange.fr/Cable/
It's donation ware.
You can also use VAC from Eugene Muzychenko.
http://software.muzychenko.net/eng/
It's commercial.
If your PC's soundcard has a Stereomix pin (sometimes this must be activated in the recording devices setup of Windows) you can feed its output into the decoding softwares. Then a VAC is only needed if you want to decode digital audio (like DRM radio).
73, Heinrich

Reason: No reason

robert632
Posts: 2
Joined: Thu Oct 06, 2016 2:53 pm

Re: New User and Virtual Audio Cable

Post by robert632 » Fri Oct 07, 2016 1:23 pm

Many thanks, I have installed VB-cable.
73 Robert
Last edited by robert632 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Bill
Posts: 11
Joined: Wed Sep 28, 2016 10:29 pm

Re: New User and Virtual Audio Cable

Post by Bill » Fri Oct 07, 2016 9:49 pm

A Thank you from me too. I hadn't researched this yet and now I don't have to. :)

Bill

Reason: No reason

Post Reply