Page 1 of 1

wxtoimg and rsp1

Posted: Tue Feb 07, 2017 12:21 am
by Wizard6733
Hi all....was hoping someone can figure this out cause i cant...ive been using wxtoimg for years and recently started using it with rtl-sdr &hdsdr and always got good/great images off of a right hand turnstile antenna i built 6 years ago just for the 137 mhz band...im now trying to use rsp1 with hdsdr and wxtoimg and im getting a good signal but the pics keep drifting and the waterfall shows the signal coming at an angle.....all my keplers are up to date as is the time on my computer. I dont want to use slant correction because the whole picture isnt slanted...just kinda stair-stepped ...im running the latest hdsdr v2.76 and the latest rsp drivers on XP SP3...the latest version of Wxtoimg and piping it with VB cable...if i use rtl-sdr my pics stay in line but i keep getting drifting from rsp1 and i dont know why

thanks guys

Image
upload photo to web

Image
upload photo to web

Re: wxtoimg and rsp1

Posted: Sun Apr 30, 2017 2:54 pm
by g1lbm
Hi

I use SDR Console V3 With RSP2 WXtoImg V2.10.11 this works well with me homemade QFH antenna with no slant problems. I did try the latest version of WXtolmg V2.11.02 Beta I found this would not work as well I could not stop the same problem that you show in your pic's but as soon as I went back to the previous version without changing any settings had no stepping at all.

Hope this helps you with your problem.

Cliff
G1LBM