RSP2PRO..Its a W.I.P...Work In Progress

Post your feedback here
RSP2user
Posts: 108
Joined: Mon Oct 09, 2017 7:11 am

Re: RSP2PRO..Its a W.I.P...Work In Progress

Post by RSP2user » Mon May 21, 2018 11:26 pm

Regarding use of long (e.g., 50 ft+) USB extension cables, yes the correct cable can work well to save on the expense of low-loss RF cable. Here is a blog review posted by SDRplay: https://www.sdrplay.com/an-alternative- ... operation/

Reason: No reason

FleetingGlimpse
Posts: 22
Joined: Wed Nov 08, 2017 3:04 am

Re: RSP2PRO..Its a W.I.P...Work In Progress

Post by FleetingGlimpse » Tue May 22, 2018 6:42 pm

Thanks for that bit of nfo Roger, I may have a copy of that version of SDRSharp. However I don't think that by reverting to that version will help me to catchup on my backlog of work.

I am all about Moving Forward.My initiation using SDRSHARP has armed me with the confidence to engage in 'Moving Forward'

I tested the RSP2Pro using a Inmarsatception configuration using a Homebrew version of A Helix antenna. I tried to design the Helix to cover both L-Band & S-Band frequencies.

My interest with Inmarsat was 'bourne' from my interest in the Outernet open satellite project. But from what i have read,They have shelved that portion of the Outernet Project. https://www.rtl-sdr.com/?s=outernet

I was also hoping to use the Inmarsat_Outernet project as a stepping stone to becoming familiar with RaspberryPI & Arduino Technology.


Best Regards, Storminorm

"A just and reasonable modesty does not only recommend eloquence, but sets off every great talent which a man can be possessed of." ....Joseph Addison

Reason: No reason

Post Reply