Page 2 of 2
Re: RSP2PRO..Its a W.I.P...Work In Progress
Posted: Mon May 21, 2018 11:26 pm
by RSP2user
Regarding use of long (e.g., 50 ft+) USB extension cables, yes the correct cable can work well to save on the expense of low-loss RF cable. Here is a blog review posted by SDRplay:
https://www.sdrplay.com/an-alternative- ... operation/
Re: RSP2PRO..Its a W.I.P...Work In Progress
Posted: Tue May 22, 2018 6:42 pm
by FleetingGlimpse
Thanks for that bit of nfo Roger, I may have a copy of that version of SDRSharp. However I don't think that by reverting to that version will help me to catchup on my backlog of work.
I am all about Moving Forward.My initiation using SDRSHARP has armed me with the confidence to engage in 'Moving Forward'
I tested the RSP2Pro using a Inmarsatception configuration using a Homebrew version of A Helix antenna. I tried to design the Helix to cover both L-Band & S-Band frequencies.
My interest with Inmarsat was 'bourne' from my interest in the Outernet open satellite project. But from what i have read,They have shelved that portion of the Outernet Project.
https://www.rtl-sdr.com/?s=outernet
I was also hoping to use the Inmarsat_Outernet project as a stepping stone to becoming familiar with RaspberryPI & Arduino Technology.
Best Regards, Storminorm
"A just and reasonable modesty does not only recommend eloquence, but sets off every great talent which a man can be possessed of." ....Joseph Addison