RSP1a only noise

Post your feedback here
Post Reply
Johntk56
Posts: 3
Joined: Fri Jun 22, 2018 3:17 pm

RSP1a only noise

Post by Johntk56 » Fri Jun 22, 2018 3:26 pm

I am the happy owner of a new RSP1a :D
- switched from a noname RTL dongle which worked perfect

My problem is that all I have is noise
- even nearby FM stations cannot be heard

Reinstalled SDRuno 1.22 three times

Probably in settings - but where :?:

/ John
Last edited by Johntk56 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: RSP1a only noise

Post by g1hbe » Fri Jun 22, 2018 4:58 pm

If you could post a picture of your screen we may be able to spot the problem.

Reason: No reason
Andy

mark.
Posts: 51
Joined: Tue Oct 03, 2017 9:14 pm

Re: RSP1a only noise

Post by mark. » Sat Jun 23, 2018 3:26 am

Also screw your antenna into another radio to make sure the antenna,cable and connectors are good.

Reason: No reason

Johntk56
Posts: 3
Joined: Fri Jun 22, 2018 3:17 pm

Re: RSP1a only noise

Post by Johntk56 » Sat Jun 23, 2018 10:01 pm

Have tested the antenna with another receiver and it is OK

The receiver works perfect with HDSDR
- screendump attached

/ John
Attachments
sdrunodump.png
sdrunodump.png (500.15 KiB) Viewed 18529 times
Last edited by Johntk56 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Tech_Support
Posts: 499
Joined: Mon Jun 01, 2015 7:00 pm

Re: RSP1a only noise

Post by Tech_Support » Sun Jun 24, 2018 5:25 am

Hello John,
You are tuned to 107.2 kHz, not 107.2 MHz.

Sincerely

Tech_Support

Reason: No reason

Johntk56
Posts: 3
Joined: Fri Jun 22, 2018 3:17 pm

Re: RSP1a only noise

Post by Johntk56 » Sun Jun 24, 2018 7:48 am

Nice sunday morning here in Denmark
- and tuned to the correct freqency it all works very well :oops:

Thanks, and have a nice day :D

/ John
Last edited by Johntk56 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply