RSPDuo and Dump1090 - help needed
Posted: Tue Oct 09, 2018 4:43 pm
Hi all,
can anyone help me? I am trying to set up DUMP1090 with RSPduo with/without SDRuno but no success at all. My O/S is Windows 10.
I installed ADS-B (DUMP1090) V1.3 and the required API from SDRplay download page.
I have tried both with API/HW driver V3.01 and with API/HW driver V2.13.
Major issue:
- DUMP1090 seems not to start (the cmd windows opens for a moment and then close); this happens both by launching start_dump109 or start8i
- entering the command console, moving to the proper path and then launching directly sdrplay_dump1090 from the cmd console, the program start/stop and returns the following message:
Tue Oct 9 18:28:44 2018 dump1090-mutability dump1090_mutability_sdrplay starting up.
Using sample converter: UC8, integer/table path
No supported RTLSDR devices found.
This happens both when SDRuno is running Dual ADS-B and when SDRuno is closed
Therefore it seems that DUMP1090 does not see RSPduo, but I have no idea why and how to troubleshoot/solve the issue
On the other end SDR RSPduo is working well with SDRuno, therefore no doubts that it is connected to the pc and properly functioning.
thanks for any recommendations!
73
Alessandro, i2sva
can anyone help me? I am trying to set up DUMP1090 with RSPduo with/without SDRuno but no success at all. My O/S is Windows 10.
I installed ADS-B (DUMP1090) V1.3 and the required API from SDRplay download page.
I have tried both with API/HW driver V3.01 and with API/HW driver V2.13.
Major issue:
- DUMP1090 seems not to start (the cmd windows opens for a moment and then close); this happens both by launching start_dump109 or start8i
- entering the command console, moving to the proper path and then launching directly sdrplay_dump1090 from the cmd console, the program start/stop and returns the following message:
Tue Oct 9 18:28:44 2018 dump1090-mutability dump1090_mutability_sdrplay starting up.
Using sample converter: UC8, integer/table path
No supported RTLSDR devices found.
This happens both when SDRuno is running Dual ADS-B and when SDRuno is closed
Therefore it seems that DUMP1090 does not see RSPduo, but I have no idea why and how to troubleshoot/solve the issue
On the other end SDR RSPduo is working well with SDRuno, therefore no doubts that it is connected to the pc and properly functioning.
thanks for any recommendations!
73
Alessandro, i2sva