New RSP1A .. nothing happens after install
Posted: Tue Jan 22, 2019 7:44 pm
Folks
(I also created a ticket .. and the bulk of it is here)
I just had this feeling this was not going to go smoothly with the RSP1A.
I got the RSP1A and installed the latest version of Uno (1.22) for the RSP1A. I have a Widows 7 Pro machine 64 bit. I followed the directions during the install and also a guy named Micheal's video who shows a complete startup
1) The software doesn't launch .. just a quick flash on the screen .. It then reports the RSP1 or something of that nature Not Found
2) It doesn't recognize its there even though Windows reports it READY FOR USE
3) I have tried the down load and install 4 times and it doesn't t see a thing
4) Device Manager shows nothing new installed for hardware
5) So I tried on the last attempt the universal way to ensure USB stuff gets going by rebooting the machine before plugging in the device. I install the software and then NOT launch the software. I then shut down the machine. I then booted back up assuming the software got installed right. I plug in the RSP1A and Windows reports initially UNIDENTIFIED then says READY FOR USE...OK...and..... the software just does nothing. When this goes I cannot shut down the PC. I have to go into a soft reboot, then immediately go to UNINSTALL programs in the Control Panel, delete the 2 SDR items shown, then the PC can shut down. So there is something in the install jamming up the works when this software never launches
6) This is ridiculous and I am really disappointed in this. My PC is nothing odd using standard ASUS stuff...has never rejected a program or USB compliant hardware in over 2 years
7) I have tried 2 USB cables.....
Quite annoyed
Jay
(I also created a ticket .. and the bulk of it is here)
I just had this feeling this was not going to go smoothly with the RSP1A.
I got the RSP1A and installed the latest version of Uno (1.22) for the RSP1A. I have a Widows 7 Pro machine 64 bit. I followed the directions during the install and also a guy named Micheal's video who shows a complete startup
1) The software doesn't launch .. just a quick flash on the screen .. It then reports the RSP1 or something of that nature Not Found
2) It doesn't recognize its there even though Windows reports it READY FOR USE
3) I have tried the down load and install 4 times and it doesn't t see a thing
4) Device Manager shows nothing new installed for hardware
5) So I tried on the last attempt the universal way to ensure USB stuff gets going by rebooting the machine before plugging in the device. I install the software and then NOT launch the software. I then shut down the machine. I then booted back up assuming the software got installed right. I plug in the RSP1A and Windows reports initially UNIDENTIFIED then says READY FOR USE...OK...and..... the software just does nothing. When this goes I cannot shut down the PC. I have to go into a soft reboot, then immediately go to UNINSTALL programs in the Control Panel, delete the 2 SDR items shown, then the PC can shut down. So there is something in the install jamming up the works when this software never launches
6) This is ridiculous and I am really disappointed in this. My PC is nothing odd using standard ASUS stuff...has never rejected a program or USB compliant hardware in over 2 years
7) I have tried 2 USB cables.....
Quite annoyed
Jay