RSP1A, SoapySdrServer and Gqrx
RSP1A, SoapySdrServer and Gqrx
Hello,
I'm currently trying to connect to a rsp1a plugged into a raspberry pi 3B+ ( with raspbian ), running SoapySdrServer (0.8.0).
My client runs on a linux mint 19 box ( Tara, 64 bits ). It works ok with CubicSDR ( 0.2.5 AppImage ) but i don't like the software... i'd prefer gqrx.
Sadly i can't manage to make it work. I tried the AppImage and the ppa version ( both 2.11.5 ). I used as parameters string :
soapy=1,driver=remote,remote_address=xx.xx.xx.xx
Any idea ? Does anybody had success with this ?
P.S. : I also tried with rsp_tcp, although it's a less satisfactory solution, but i have audio problems in gqrx. The sound is intermittent and i can't get it right, even with smaller bandwidth etc...
Thanks !
I'm currently trying to connect to a rsp1a plugged into a raspberry pi 3B+ ( with raspbian ), running SoapySdrServer (0.8.0).
My client runs on a linux mint 19 box ( Tara, 64 bits ). It works ok with CubicSDR ( 0.2.5 AppImage ) but i don't like the software... i'd prefer gqrx.
Sadly i can't manage to make it work. I tried the AppImage and the ppa version ( both 2.11.5 ). I used as parameters string :
soapy=1,driver=remote,remote_address=xx.xx.xx.xx
Any idea ? Does anybody had success with this ?
P.S. : I also tried with rsp_tcp, although it's a less satisfactory solution, but i have audio problems in gqrx. The sound is intermittent and i can't get it right, even with smaller bandwidth etc...
Thanks !
Last edited by Squirrax on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason