Compiling for Raspberry Pi?
Posted: Thu Feb 25, 2016 1:48 pm
I have installed the SDRPlay with HDSDR on windows10 and all looks fine albeit on a piece of damp string as an aerial.
I am now trying to compile SoapySDR on my Raspberry pi with special kernel supplied with my Makibes LCD panel (includes the touch-screen drivers).
When i test the install I get "Wrong ELF Class: ELFCLASS64".
I followed these instructions on cjcliffe's wiki:
$ git clone https://github.com/pothosware/SoapySDR.git
$ cd SoapySDR
SoapySDR$ mkdir build
build$ cd build
build$ cmake .. -DCMAKE_BUILD_TYPE=Release
build$ make
build$ sudo make install
build$ sudo ldconfig
build$ SoapySDRUtil --info #test SoapySDR install
Any special switches I need?
73 Phil,
GM3ZZA
I am now trying to compile SoapySDR on my Raspberry pi with special kernel supplied with my Makibes LCD panel (includes the touch-screen drivers).
When i test the install I get "Wrong ELF Class: ELFCLASS64".
I followed these instructions on cjcliffe's wiki:
$ git clone https://github.com/pothosware/SoapySDR.git
$ cd SoapySDR
SoapySDR$ mkdir build
build$ cd build
build$ cmake .. -DCMAKE_BUILD_TYPE=Release
build$ make
build$ sudo make install
build$ sudo ldconfig
build$ SoapySDRUtil --info #test SoapySDR install
Any special switches I need?
73 Phil,
GM3ZZA