NOOB IF FT897 question
NOOB IF FT897 question
Hi I am using a PAT adapter board from sdrkits so my IF goes into the sdrplay. Where do I set my 70Mhz IF frequency?? in sdruno? It works great in HDSDR! But I can't figure out where to set the offset for IF in sdruno.
Last edited by pa5fdx on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: NOOB IF FT897 question
pa5fdx, not sure I found anything useful to you, but click ADV (Show RSP Advanced Control Window) on the main window. Hovering the mouse over a settings almost always brings up a description. Do this on the various setting on the RSP Advanced Control Window and left and right click and see if any of these settings are useful. There are a number of windows to try this on, but this one looked the most promising to me. Good luck and enjoy, John.
Reason: No reason
Re: NOOB IF FT897 question
tnx but no joy there
Last edited by pa5fdx on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason