S meter adjustment ?
Re: S meter adjustment ?
Main panel (the one with the 'play' button) > SETT (button in top of frame) > CAL.
Most people find the meter reads too high and a setting of -15 to -20 is about right.
Most people find the meter reads too high and a setting of -15 to -20 is about right.
Reason: No reason
Andy
Re: S meter adjustment ?
In my case the new ajustment will not store.
When I close the Main Settings box and re-open it the old value returns.
Rene
When I close the Main Settings box and re-open it the old value returns.
Rene
Last edited by pc2c-Rene on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: S meter adjustment ?
Are we talking people that measured with accurate test equipment or they just compared to their other receiver? And is this for all RSP versions or a particular one? I don't run any other SDR software so I have no idea how SDRuno compares in s meter readings to those.g1hbe wrote:Main panel (the one with the 'play' button) > SETT (button in top of frame) > CAL.
Most people find the meter reads too high and a setting of -15 to -20 is about right.
Reason: No reason
-
- Posts: 499
- Joined: Mon Jun 01, 2015 7:00 pm
Re: S meter adjustment ?
The S-meter in SDRuno is correctly calibrated to IARU standards and maintains accuracy across the full range. The same is not true for many other items of communications equipment. The only requirement for any adjustment is to allow for external amplification or loss.
Sincerely
SDRplay Tech_Support
Sincerely
SDRplay Tech_Support
Reason: No reason