VB Cable - Can't get it to work with Fldigi or HRD
VB Cable - Can't get it to work with Fldigi or HRD
Sorry to bring this up again as this is a common topic, but I am reaching a point of frustration.
I am using SDRuno with a SDRplay 1, and it works very nicely except for my inability to receive digital modes. I have installed VB-Cable, and have successfully installed the drivers and activated them. Fldigi also sees the VB-Cable, and I have activated it as the audio input as SDRplay has a VB-Cable as the output.
Problem - Fldigi does not see anything, and I have no audio. The latter is likely due to the fact that I don't have VB-Receive, but the former should not be. What am I missing that would allow me to align these signals and allow me to receive PSK31 and OLIVIA
Thanks again for your patience.
I am using SDRuno with a SDRplay 1, and it works very nicely except for my inability to receive digital modes. I have installed VB-Cable, and have successfully installed the drivers and activated them. Fldigi also sees the VB-Cable, and I have activated it as the audio input as SDRplay has a VB-Cable as the output.
Problem - Fldigi does not see anything, and I have no audio. The latter is likely due to the fact that I don't have VB-Receive, but the former should not be. What am I missing that would allow me to align these signals and allow me to receive PSK31 and OLIVIA
Thanks again for your patience.
Last edited by POH_kevin on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: VB Cable - Can't get it to work with Fldigi or HRD
Added note - I did get some help from N3ZP's thread, which is how I was able to set up the VB-Cable.
viewtopic.php?f=11&t=1770
viewtopic.php?f=11&t=1770
Last edited by POH_kevin on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason