Manually setting the LO

Discussions about everything to do with SDRuno
Post Reply
johnhlong
Posts: 23
Joined: Tue Mar 14, 2017 11:25 pm
Location: Nephi, UT

Manually setting the LO

Post by johnhlong » Sat Mar 18, 2017 11:55 pm

When setting up multiple virtual receivers it would be nice to be able to manually enter the LO frequency and then lock it.

Is it possible to manually enter the LO frequency?

If so, how do I do that?

Thanks,
John
KW7A
Last edited by johnhlong on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Manually setting the LO

Post by sdrplay » Mon Mar 20, 2017 12:18 am

The LO is determined by whatever the VRX#0 frequency is set to. Set the LO frequency by setting the frequency in VRX0 then press LO LOCK in the main window. Subsequent VRXs are then limited to the LO frequency +/- sample rate / 2

Best regards,

SDRplay Support

Reason: No reason

Post Reply