Wish List
Posted: Fri Mar 31, 2017 10:20 pm
SDRUNO works great.
In my case it would be icing on the cake if you added a few enhancements:
1) SPLITS: A way to copy the frequency from VR0 to VR1 and/or VR2 so I can setup being able to monitor / work Splits easily.
Once I find a DX working "Split" (using VR0) I would copy the frequency to VR1 and continually monitor his transmission on VR1.
That way I could monitor the DX station on VR1 and follow the pileup on VR0.
When I found a likely opening to call the DX on, my transceiver would be tuned to the VR0 frequency.
2) A color band across the bottom of the Spectrum display to show the Ham Band Limits.
3) A way to change the Ham band presets on the Rx panel. I would like to setup some of the buttons to select:
The 60 meter Ham Band
The Air Traffic Control tower at my local airport.
Pre sets for Ham Satellites
In my case it would be icing on the cake if you added a few enhancements:
1) SPLITS: A way to copy the frequency from VR0 to VR1 and/or VR2 so I can setup being able to monitor / work Splits easily.
Once I find a DX working "Split" (using VR0) I would copy the frequency to VR1 and continually monitor his transmission on VR1.
That way I could monitor the DX station on VR1 and follow the pileup on VR0.
When I found a likely opening to call the DX on, my transceiver would be tuned to the VR0 frequency.
2) A color band across the bottom of the Spectrum display to show the Ham Band Limits.
3) A way to change the Ham band presets on the Rx panel. I would like to setup some of the buttons to select:
The 60 meter Ham Band
The Air Traffic Control tower at my local airport.
Pre sets for Ham Satellites