Help with SDRuno and virtual audio cables
Posted: Tue Jun 27, 2017 6:03 am
Hi all,
I'm attempting to use HDRuno and an RSP2 to send two different audio signals to two running instances of WSJT-X.
One WSJT-X is set for 14.0956 MHz WSPR mode, and the other one is set for 14.0780 MHz JT9 mode. I have Virtual Cable installed (actually three cables... "Cable", "Cable-A", and "Cable-B").
In the SDRuno "Main Settings" window I set "Input > WME Input Device" to "Cable-A Output"
In the first VRX, I have "RX Settings > Out" set to "Cable-A Input".
In the second VRX, I have "RX Settings > Out" set to "Cable-B Input".
The first WSJT-X instance is set up to use Cable-A, and the second WSJT-X is set up for Cable-B. The problem is the second WSJT-X instance isn't getting audio from SDRuno's second VRX (both are set up for Cable-B). It seems like it's related to not being able to use different "WME Input Device" cables for each VRX?
Is what I'm trying to do even possible? I've read through several forums and seen Youtube videos, and it looks like people are actually doing this, but I'm stuck.
Thanks for any help. 73
Jeff KP3FT
I'm attempting to use HDRuno and an RSP2 to send two different audio signals to two running instances of WSJT-X.
One WSJT-X is set for 14.0956 MHz WSPR mode, and the other one is set for 14.0780 MHz JT9 mode. I have Virtual Cable installed (actually three cables... "Cable", "Cable-A", and "Cable-B").
In the SDRuno "Main Settings" window I set "Input > WME Input Device" to "Cable-A Output"
In the first VRX, I have "RX Settings > Out" set to "Cable-A Input".
In the second VRX, I have "RX Settings > Out" set to "Cable-B Input".
The first WSJT-X instance is set up to use Cable-A, and the second WSJT-X is set up for Cable-B. The problem is the second WSJT-X instance isn't getting audio from SDRuno's second VRX (both are set up for Cable-B). It seems like it's related to not being able to use different "WME Input Device" cables for each VRX?
Is what I'm trying to do even possible? I've read through several forums and seen Youtube videos, and it looks like people are actually doing this, but I'm stuck.
Thanks for any help. 73
Jeff KP3FT