Page 1 of 1

SDRuno Problems

Posted: Tue Jul 18, 2017 12:59 am
by AIØC-Bill
I'm having a couple of problems with SDRuno. This is a new install on a new HP Pavilion computer with a new RSP2pro.

When I move my mouse cursor into the N1 or N2 BW box, the background of the box turns purple, as expected. When I roll my mouse wheel, the BW value changes, as expected. But the frequency in the RX CONTROL window also change by the step value!

Another problem is if I move my mouse cursor over one of the digits of the frequency in the RX CONTROL window, the yellow line/bar appears above the digit, as expected. When I roll my mouse wheel, the digit does not change but the frequency changes by the step value. If I roll my mouse wheel very quickly, the digit does change and the step value is applied as well!

Does anyone have any ideas what might be wrong here? Do I not have something configured correctly or am I not doing these operations correctly?

Thanks,

Bill...
AIØC

Re: SDRuno Problems

Posted: Mon Jul 31, 2017 9:54 pm
by mikeladd
Hi Bill

Take a look at this video. It should help in explaining the notch features in Uno.

https://youtu.be/s5NHFPhVG5Q