SDRuno 1.2 and RSP2 Pro

Discussions about everything to do with SDRuno
Post Reply
kingdo
Posts: 1
Joined: Fri Dec 29, 2017 5:39 pm

SDRuno 1.2 and RSP2 Pro

Post by kingdo » Fri Dec 29, 2017 6:11 pm

When running the RSP2 Pro from an external reference, does SDRuno indicate, somewhere, what reference is active?
I would like to see verification as to which reference the RSP2 is actively using, internal or external.
Thank you!
Last edited by kingdo on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: SDRuno 1.2 and RSP2 Pro

Post by sdrplay » Fri Jan 05, 2018 6:18 pm

It's a hardware sense, so SDRuno doesn't know what reference source is being used. If the RSP2 is used as the reference output, then there is a switch to enable that in SDRuno and a notification will appear in the Main Window.

Best regards,

SDRplay Support

Reason: No reason

Post Reply