Notch filters

Discussions about everything to do with SDRuno
Post Reply
Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Notch filters

Post by Paul » Wed Jan 31, 2018 6:15 pm

Using the "on-the-fly" facility in SDRuno for setting notch filters one and two has been most convenient and useful.
However, i have developed a problem, which manifests itself as these filters becoming mutually cancelling...
e.g. Select target emission with notch filter one and bingo! suppressed.
However, upon targeting a second emission with notch filter two, notch filter one is cancelled on emission #1 and suppresses that selected for notch filter two.
The same effect is achieved in whichever order the notches are selected.
I have done a couple of reboots and uno reset to no avail, but not yet "gone the whole hog" of reloading 1.22, which I am currently using.
Any suggestions would be appreciated.

Reason: No reason

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: Notch filters

Post by Paul » Wed Jan 31, 2018 8:21 pm

Problem resolved - not really sure quite how though, after further rebooting....

Reason: No reason

Post Reply