kenwood tys590sg sdrpla2 and sdruno Help me

Discussions about everything to do with SDRuno
Post Reply
iz0hap
Posts: 1
Joined: Mon Feb 26, 2018 11:08 am

kenwood tys590sg sdrpla2 and sdruno Help me

Post by iz0hap » Mon Feb 26, 2018 11:12 am

Hello to all. I use a microham usb III. It is connected to a kenwood ts 590sg. with all the programs it is not a problem, but if I use my sdrplay2 as a receiver of the ts 590 sg connected to the DRV socket I have problems. Surely I have problems with the virtual com or with the sound card of the PC (windows 7). practically when I connect everything and I throw sdruno I receive nothing on sdruno. use ominirig connected to the virtual com created by the usb III software. when I change the frequency on the radio it changes the frequency even on sdruno, but I do not receive anything on the waterfall while on the radio I normally receive. does anyone have the same problem and solved it? please help me.
73 de iz0hap.
Last edited by iz0hap on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Roger
Posts: 217
Joined: Fri Dec 29, 2017 7:59 pm

Re: kenwood tys590sg sdrpla2 and sdruno Help me

Post by Roger » Tue Feb 27, 2018 3:12 am

See the other post on Omni-Rig problems. You might need to use the Kenwood 6.73 USB driver instead of 6.75.

Reason: No reason

Post Reply