general audio output tone control

Discussions about everything to do with SDRuno
Post Reply
N1EYZ
Posts: 19
Joined: Fri Dec 22, 2017 6:37 pm

general audio output tone control

Post by N1EYZ » Mon Feb 26, 2018 10:40 pm

I don't think I have seen much discussion on how to achieve audio tone control (bass, treble, etc.) in SDRuno. What are folks using in this area? Piping (via virtual cables?) the audio output into the controls that come with the computer OS in the form of a mixer panel? I'm thinking that the notch controls in SDRuno are insufficient for this. . .

Ideas appreciated (and perhaps a future SDRuno capability?)

Thanks,
N1EYZ (Roger)

Reason: No reason

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: general audio output tone control

Post by Paul » Wed Feb 28, 2018 8:21 am

Hi Roger
Have you experimented with he HP Filter control, located within the "Sett" menu of the RX Control panel?
Use either mouse L/R keys or wheel to increment/decrement - this does have a tonal effect.
I hope this may be of help to you.

Reason: No reason

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: general audio output tone control

Post by g1hbe » Wed Feb 28, 2018 11:16 am

Selecting the 'soft filter' feature might help. I find the digital filters give a rather harsh top end due to their super-flat response and steep sides. The soft filter gives the filters 'rounded shoulders' like hardware xtal/ceramic filters which knocks of the edginess.

Reason: No reason
Andy

Mike2459
Posts: 318
Joined: Mon Jul 24, 2017 8:24 pm

Re: general audio output tone control

Post by Mike2459 » Wed Feb 28, 2018 7:18 pm

Most soundcards (even the onboard ones) offer the capability of tone control (bass/treble) as well as special effects. If you can hear the audio in your speakers or headphones no additional patching should be required.

Reason: No reason

N1EYZ
Posts: 19
Joined: Fri Dec 22, 2017 6:37 pm

Re: general audio output tone control

Post by N1EYZ » Wed Feb 28, 2018 7:19 pm

thanks everyone! I'll give these solutions a try soon.

N1EYZ (roger)

Reason: No reason

Post Reply