VHF Reception

Discussions about everything to do with SDRuno
Post Reply
RichardG062
Posts: 13
Joined: Mon Dec 18, 2017 7:02 pm

VHF Reception

Post by RichardG062 » Sun Apr 15, 2018 8:20 pm

Are there any recommended settings for VHF reception in SDRuno. I am particularly interested in the aircraft band and receive a good signal but on occasions I notice this tends to overload the receiver and the squelch control is almost set to maximum.

Regards
Last edited by RichardG062 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Richard Griffith

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: VHF Reception

Post by Paul » Mon Apr 16, 2018 12:20 pm

Hi Richard
If you have adjusted the Gain/Gain Reduction to your satisfaction on the Main Panel (default is Gain reuction. but selectable to Gain under the Main Panel "Sett" menu) and this is generally producing an acceptable signal level, please be aware that when an aircraft is in close proximty to you, the transmission will be much stronger to the extent that it may overload your receiver and corrupt.
Attachments
2018-04-16 (2).png
2018-04-16 (2).png (64.01 KiB) Viewed 6725 times

Reason: No reason

Post Reply