Is it safer to Transmist?
Posted: Sat May 05, 2018 7:27 am
Thank you for getting me in.
I have Yeasu FTDx-3000D and RSP2Pro Port A connected to the Rx Out of the rig. Using OmniRig and receiving and controlling the rig works perfect.
My worry is, can I transmit (have a QSO) while the SDR is still connected to the rig and the computer? I use 100W and gap between the SDR and the radio is about 3 feet.
Is there anything else I need to setup?
I have Yeasu FTDx-3000D and RSP2Pro Port A connected to the Rx Out of the rig. Using OmniRig and receiving and controlling the rig works perfect.
My worry is, can I transmit (have a QSO) while the SDR is still connected to the rig and the computer? I use 100W and gap between the SDR and the radio is about 3 feet.
Is there anything else I need to setup?