Page 1 of 1
Sample Rate to 3-4-5- ..... Mhz
Posted: Mon May 21, 2018 3:50 pm
by pc2c-Rene
Since I used my SDRplay as a pan adapter for my FTdx5000 I can not set the Sample Rate to 3-4-5- etc. Mhz anymore.
Only 2 and 8,192 can I select.
What have I forgotten?
Re: Sample Rate to 3-4-5- ..... Mhz
Posted: Mon May 21, 2018 4:29 pm
by Tech_Support
Hello,
This is because you have put your device in low IF mode and in Low IF mode, these are the only sample rates available. Open up the Settings Panel (SETT button on the main panel) and select Zero IF mode and you will be able to set up to 10 MHz sample rate again.
Sincerely
SDRplay Tech_Support
Re: Sample Rate to 3-4-5- ..... Mhz
Posted: Mon May 21, 2018 8:12 pm
by pc2c-Rene
What can life be easy if you are getting a little help.
Thanks for the quick reply.